Palaplast Push-fit Adapter Ø16mm - 3/4" MT for SPXFLEX

Product detailed description

The push-fit adapter with a diameter of Ø16mm and 3/4" male thread is used for direct connection of drip hose or LDPE Ø16mm pipe to various components of an irrigation system. This element allows for quick and easy installation of irrigation components as well as pipes with an outer diameter of 16mm.

Thanks to its special shape, this end fitting can be easily slid onto the pipe without the need for any tools. Simply push and snap the fitting directly onto the hose with a simple twisting hand motion. After fitting the adapter onto the hose, we recommend using a stainless steel clamp to secure the hose and prevent it from slipping off the connector.

The adapter is suitable for a working water pressure of max. 5.5 bar.

NOTICE: Do not use any lubricant (grease, soap, oil, etc.)

The fittings are designed for mechanical joining and shaping of all types of polyethylene hoses (LDPE, HDPE). The connection is created by compressing the clamping ring around the outer wall of the pipe and then sealing it with a rubber ring. The main purpose of these connecting materials is to shape, extend, or branch irrigation piping as needed.