Pedrollo flow switch EASYPRESS-2M

Product detailed description

The EASYPRESS flow switch represents the latest fully automatic, electronic solution that replaces a classic pressure switch or tank. It protects the pump against unfavorable conditions such as dry running or frequent on/off cycles. The device allows both manual and automatic restart, which automatically restores normal operation after a fault.

The EASYPRESS switch activates the pump at a preset pressure of 2.2 bar, monitors the water flow, and switches off the pump if the flow drops below 2 liters per minute. This mechanism effectively eliminates problems with frequent pump starts at low flow, thus extending its lifespan and reducing electricity consumption.

Easypress mounting positions:

The flow switch can be installed in any position, however the correct direction of water flow must be respected, which is determined by the flow direction through the check valve. This valve is located in the lower threaded part of the device.

Technical features of the product

• Min flow - 2l/min
• Max working pressure - 10bar
• Switch-on pressure - 2.2bar
• Max water temperature - 55°C
• Power supply - 230V / 50Hz
• Protection degree - IP65
• Cable length - without cable
• Weight - 1.81kg
• Maximum water discharge head between the device and the highest outlet valve - 18 m

Pressure and flow switches are not suitable for jet and peripheral pumps. The pump used must have sufficient discharge head for the device to function properly, and its value must be at least 1 bar higher than the switch-on value of the switch.

NOTICE: THE PACKAGE DOES NOT INCLUDE A CABLE FOR CONNECTION TO THE ELECTRICAL NETWORK, BUT IT DOES CONTAIN GROMMETS AND SEALS FOR ITS ELECTRICAL INSTALLATION.