Pipe insulation 35 mm (1")/9 mm
Code: IZO 35/09Product detailed description
Pipe insulation 35 mm (1")/9 mm
Pipe insulation, or insulating foam for pipes, is used to insulate the heating circuit against heat loss to the surroundings. Its second function is to retain condensed water on the heating pipes.
The pipe insulation is made of Mirelon material.
The insulation comes in two-metre rods. It is slid along the pipe where possible; otherwise it can be slit lengthwise.
The insulation tube is intended for:
- insulating hot and cold water distribution
- insulating central heating distribution
- insulating refrigeration and air-conditioning distribution
Product properties:
- material: Mirelon
- temperature range: -30 °C to +90 °C
- length: 2 m
- colour: grey
For a pipe with a diameter of 15 mm, you need insulation with a diameter of 18 mm. For a pipe diameter of 18 mm, you need insulation with a diameter of 22 mm, and so on.
Minimum order is 2 metres.
When adding to the cart, enter the number of metres, not the number of pieces.
| Inner diameter | Wall thickness | Package (running metres per package) |
| 15 mm (1/4") | 5 mm | 600 |
| 18 mm (3/8") | 5 mm | 500 |
| 22 mm (1/2") | 5 mm | 400 |
| 25 mm | 5 mm | 330 |
| 28 mm (3/4") | 5 mm | 260 |
| 32 mm (1") | 5 mm | 200 |
| 35 mm (1") | 5 mm | 190 |
| Inner diameter | Wall thickness | Package (running metres per package) |
| 15 mm (1/4") | 9 mm | 330 |
| 18 mm (3/8") | 9 mm | 330 |
| 22 mm (1/2") | 9 mm | 280 |
| 25 mm | 9 mm | 220 |
| 28 mm (3/4") | 9 mm | 200 |
| 32 mm (1") | 9 mm | 170 |
| 35 mm (1") | 9 mm | 150 |
| 42 mm (5/4") | 9 mm | 120 |
| 45 mm | 9 mm | 110 |
| 49 mm (6/4") | 9 mm | 100 |
| 52 mm | 9 mm | 80 |
| 55 mm | 9 mm | 80 |
| 62 mm (2") | 9 mm | 70 |
| 65 mm | 9 mm | 60 |
| 76 mm (2 1/2") | 9 mm | 50 |
| Inner diameter | Wall thickness | Package (running metres per package) |
| 15 mm (1/4") | 13 mm | 250 |
| 18 mm (3/8") | 13 mm | 220 |
| 22 mm (1/2") | 13 mm | 180 |
| 25 mm | 13 mm | 170 |
| 28 mm (3/4") | 13 mm | 160 |
| 35 mm (1") | 13 mm | 100 |
| 42 mm (5/4") | 13 mm | 90 |
| 45 mm | 13 mm | 80 |
| 49 mm (6/4") | 13 mm | 70 |
| 52 mm | 13 mm | 70 |
| 55 mm | 13 mm | 70 |
| 62 mm (2") | 13 mm | 50 |
| 65 mm | 13 mm | 50 |
| 76 mm (2 1/2") | 13 mm | 40 |
| 89 mm (3") | 13 mm | 32 |
| 92 mm | 13 mm | 26 |
| 102 mm (3 1/2") | 13 mm | 24 |
| 108 mm (3 3/4") | 13 mm | 24 |
| 114 mm (4") | 13 mm | 22 |
| Inner diameter | Wall thickness | Package (running metres per package) |
| 15 mm (1/4") | 20 mm | 140 |
| 18 mm (3/8") | 20 mm | 140 |
| 22 mm (1/2") | 20 mm | 100 |
| 25 mm | 20 mm | 100 |
| 28 mm (3/4") | 20 mm | 90 |
| 35 mm (1") | 20 mm | 70 |
| 42 mm (5/4") | 20 mm | 60 |
| 45 mm | 20 mm | 60 |
| 49 mm (6/4") | 20 mm | 56 |
| 52 mm | 20 mm | 40 |
| 55 mm | 20 mm | 40 |
| 62 mm (2") | 20 mm | 36 |
| 65 mm | 20 mm | 30 |
| 76 mm (2 1/2") | 20 mm | 24 |
| 89 mm (3") | 20 mm | 24 |
| 92 mm | 20 mm | 24 |
| 102 mm (3 1/2") | 20 mm | 20 |
| 108 mm (3 3/4") | 20 mm | 16 |
| 114 mm (4") | 20 mm | 14 |
| Inner diameter | Wall thickness | Package (running metres per package) |
| 22 mm (1/2") | 30 mm | 60 |
| 28 mm (3/4") | 30 mm | 50 |
| 35 mm (1") | 30 mm | 44 |
| 42 mm (5/4") | 30 mm | 40 |
| 45 mm | 30 mm | 36 |
| 49 mm (6/4") | 30 mm | 32 |
| 52 mm | 30 mm | 30 |
| 55 mm | 30 mm | 30 |
| 62 mm (2") | 30 mm | 24 |
| 65 mm | 30 mm | 24 |
| 76 mm (2 1/2") | 30 mm | 20 |
| 89 mm (3") | 30 mm | 16 |
Frequently asked questions
- How do I choose the correct insulation diameter for my pipe? Insulation is chosen according to the outer diameter of your pipe - the inner diameter of the insulation must be slightly larger so it can be pulled onto the pipe (e.g. for a 15 mm pipe, insulation with an 18 mm inner diameter is used; for an 18 mm pipe, 22 mm insulation, etc.). You will find the exact diameter pairs in the comparison table above.
- What is the difference in insulation wall thickness (6 mm vs. 9 mm)? A thicker wall (9 mm) provides better thermal insulation performance and is more suitable for longer runs, outdoor pipework, or where you want to minimise heat loss as much as possible; a thinner wall (6 mm) is sufficient for shorter sections or less critical distribution and is cheaper.
- How is the insulation fitted onto already-installed pipework? Where possible, the insulation is slid on from the end of the pipe before it is connected. For pipework that is already connected, where the insulation cannot be slid on from the end, it can be slit lengthwise and then "wrapped" around the pipe.
- What does the minimum order of 2 metres mean, and why is it ordered in metres, not pieces? The insulation is supplied in 2-metre rods as the smallest sales unit - so you always enter the number of metres (in multiples of 2) in the cart, not the number of individual package pieces.
- Does the insulation also protect against condensation? Yes, in addition to preventing heat loss to the surroundings, the insulation also prevents condensation from forming on the pipe surface (typical especially for cold-water or cooling distribution), thereby protecting surrounding structures from moisture.
Additional parameters
| Category: | pipe insulation |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.1 kg |
| Color: | Grey |
| Material type: | mirelon |
| Length: | 2 m |
| Operating Temperature Range: | -30 °C do +90 °C |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
M
Martin
Martin
Dobrý deň.
Položil som na podlahu podkrovia polystyrén pre suchú podlahovku UHPD a rozmášacie plechy UHPS. Od Vás som kúpil 6 balíkov potrubia po 100 metrov PEX-AL-PEX 16x2 . Vodári mi nainštalovali do skrinky 4-cestný rozvádzač. Pred tým, než budem klásť potrubie by som chcel od Vás vedieť či môžem dať napr. na prvý vstup a výstup 98 metrov potrubia, na druhý vstup a výstup 98 metrov potrubia a na tretí vstup a výstup len 32 metrov potrubia a na štvrtý 32 metrov potrubia? Chcem to tak rozdeliť kvôli tomu, aby som nemal zbytočne veľký odpad. Na podlahu podkrovia som si kúpil 300 metrov potrubia a keby som chcel dať na každý okruh 65 metrov potrubia musel by som použiť 400 metrov potrubia v štyroch baleniach a mal by som o 100 metrov viacej odpadu. Viete mi prosím Vás poradiť alebo existujú na to nejaké spojky, ktorými sa dá predĺžiť potrubie v suchej podlahovke? Ak áno tak napíšte mi presne čo by som potreboval na predĺženie potrubia v polystyréne suchej podlahovky.
Ďakujem Vám
A
Atria.sk
Atria.sk
Dobrý deň,
fungovať to bude, avšak nemalo by sa to robiť, možno Vám to nepôjde vyregulovať, tam kde je menej bude mať menší odpor, tak treba aspoň rovnaké dĺžky, a keď spojky tak : https://www.atria.sk/skrutkove-spoje/
Ale hovorím nemalo by sa to spájať.
Pekný deň.
J
Jozef
Jozef
Zdravím, chcel by som sa spýtať na,, izoláciu na potrubie". Ako je to s izolačnými vlastnosťami proti mrazu?
A
ATRIA
ATRIA
Dobrý deň, Izolácia 35 mm/9 sa používa proti tepelným stratám. Neslúži ako ochrana pred mrazom a ani Vám neviem povedať koľko stupňov pri akej teplote je únosných. Ďakujeme Vám za pochopenie.