Plantit Irrigation Timer for Automatic Watering

Product detailed description

This very versatile timer/irrigator can be used for irrigation systems from a tank or a rain barrel, but it can also be connected to a water supply. The package includes a removable dirt filter and a protective cover for the control panel.

Technical parameters

The timer is equipped with two programming steps:

• Using the RUN Time dial, you set the desired watering duration. The duration can be set in the range of 0–120 minutes (1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes).
• Using the FREQUENCY dial, you set the watering interval / the required time between watering cycles. It can be used for watering at intervals ranging from once an hour to once a week (1, 2, 3, 4, 6, 8, 12, 24, 48, 72 hours or 1 week).

The timer is suitable for a drip irrigation set for greenhouses 3x4m and 3x6m.

Power supply

The irrigator is powered by two AAA 1.5 V alkaline batteries (batteries are not included in the package). Under standard conditions, the battery lasts the whole season, and the control panel has a battery status indicator. If the batteries are low, the safety valve automatically closes.

• Working pressure range: 0–10 bar, which means the timer can withstand the pressure of a standard water mains supply.

Package includes

Adapters for connection to a garden tap, a garden tank valve, or a 13 mm snap-fit hose connector. The outlet also has an adapter for a 13 mm hose. The package includes hose connectors with internal/external 3/4" thread.

Accessories

You can connect any type of drip irrigation to the timer, which can be used in a greenhouse, on flower beds, or in individual growing containers.