Pontaqua Pool Wall Cleaner/Descaler 1l

Product detailed description

The liquid pool wall cleaner/descaler with a volume of 1 l has an acidic nature and helps remove limescale deposits, grease or rust stains on pool walls and edges.

Main features of the product:

• dissolves limescale and other deposits present on pool walls,
• suitable for cleaning surfaces around the pool, pathways to the pool, bathrooms, showers and toilets,
• eliminates algae and rust stains,
• does not damage coatings based on chlorinated rubber and synthetic resin, nor plastics,
• the product is economical, as it can be diluted in a ratio of up to 1:30,
• do not use on materials sensitive to acids such as marble, enamel, chrome, steel, and similar,
• the product's vapors may promote corrosion.

Product use:

Use the product exclusively according to the instructions for use. Depending on the type and extent of contamination, dilute it with water in a ratio of 1:3 to 1:10, apply and clean the surface. For a higher cleaning effect, we recommend using warm water. Rinse the cleaned surface thoroughly with water. In case of heavier contamination, repeat the procedure until complete cleaning is achieved. Make sure the product does not get into the pool water.

Apply the undiluted product with a sponge or cloth to the contaminated parts of the pool and let it act for 5 to 10 minutes. Then remove the dirt mechanically or with a brush. In case of heavy contamination, repeat the whole procedure and rinse the cleaned spot with water.

If the product enters the pool water, it will not cause a defect or deterioration of the water, as the alkalinity will increase by minimal, i.e. immeasurable values.

Composition:

• hydrochloric acid - 10 - 20%
• phosphoric acid - 2.5 - 10%