Pumping sewage shaft ERA 1300x1000 with WQI 15-7-1,1 shredder

Product detailed description

The pumping sewage shaft ERA 1300x1000 is a watertight, fully equipped small pumping station designed for pumping wastewater and sludge. This pumping sewage shaft is used mainly where a gravity connection to the public sewage network is not possible, so it is necessary to overcome the height difference from the inlet to the sewage network. The pumping sewage shaft ERA 1300x1000 allows the discharge of wastewater or drainage water from remote locations such as: detached residential buildings and housing estates industrial and chemical plants recreational facilities Pump used in this shaft Submersible sewage pump WQI 15-7-1,1 with shredder it is a high-performance pump it has thermal protection installed in the motor winding the pump features a three-channel shredding system this pumping shaft is suitable mainly for places where 5 - 8 people stay, either occasionally or for extended periods Pump head (m): 18 Maximum flow (l/min): 300 Pump power input (kW): 1,1 Pump design - voltage (V): 230 Float switch: yes The difference between the shafts we offer lies mainly in the submersible sewage pump used in the pumping shaft. You can find the values, performance and other parameters of the pump by clicking the link below in this text, which provides information about the pump used in the shaft. Thanks to the fact that the pump used in the ERA 1300x1000 shaft is one very commonly used for this purpose - pumping - this pumping shaft is especially suitable for places where 5 - 8 people live permanently. Features and benefits for the user: simple construction, low weight – easy transport and installation complete equipment – no additional modifications required self-supporting construction – the shaft does not need to be encased in concrete (except in the case of a low groundwater level) polypropylene – guarantee of exceptional chemical and mechanical resistance as well as long service life inlet: DN 110mm (the inlet can be adjusted to DN 125 or DN 160, in which case this information must be stated in the order notes) outlet: DN 50mm inlet chimney to the shaft: DN 600mm When purchasing this product - the pumping sewage shaft ERA 1300x1000 - you can order at a discount of up to 50% the submersible sewage drainage pump IP 400, which you can use, for example, for service cleaning of the shaft. If you are interested in this option, it must be stated in the order notes - your order will then be revised accordingly. Location of the pumping shaft: The pumping sewage shaft ERA 1300x1000 is supplied as standard with a plastic cover, which must not be subjected to regular foot traffic or vehicle passage. In the case of this installation, access to the cover must be prevented (e.g. by a removable concrete slab or by fencing off the shaft area). The pumping sewage shaft ERA 1300x1000 includes: Pumping sewage shaft (height 1300mm) Submersible sewage pump WQI 15-7-1,1 with shredder a set of fittings with a non-return ball valve connected to the pump