PWM Solar Charge Controller EPever 20A 12/24V LS Series

Product detailed description

Quality PWM solar charge controller 20A 12V/24V. Suitable only for panels with a power of approx. 300Wp/12V battery and 600Wp/24V battery.
PWM solar charge controller. Its design is intended for small off-grid solar systems with 12V solar panels (36 cells) for charging a 12V battery, or 24V solar panels (72 cells) for charging a 24V battery, with a maximum charging current of up to 20A. Its advantages are very simple and easy installation and reliable operation.
We recommend operating it with the following solar panels from our offer:
- Victron Energy solar panel 30Wp/12V
- Victron Energy solar panel 60Wp/12V
- Victron Energy solar panel 90Wp/12V
- Victron Energy solar panel 115Wp/12V
- Victron Energy solar panel 175Wp/12V
The controller's parameters are set using an external MT50 display.
You can also set parameters and monitor the device on your PC – for this you will only need an EPsolar USB communication cable and software.
Technical parameters:
- automatic detection of 12V or 24V
- three-stage battery charging
- overvoltage protection
- short-circuit protection
- reverse polarity protection for solar panel and battery connections
- disconnects the load output at low voltage
- optional external temperature sensor
- programmable and can be monitored using an external MT-50 display
- RS485 MODBUS communication protocol interface
- dimensions: 159.6x81.4x47.8mm
- weight: 300g
- operating temperature: -35°C to +55°C
- maximum connecting cable size: 4mm2
- designed for indoor installation, wall mounting
- for charging lead-acid batteries
- protection rating: IP30