Rain Bird Subsurface Drip Irrigation Hose XFS 16mm - 100m

Product detailed description

High-quality subsurface drip PE pipe with an outer diameter of 16mm, designed for invisible irrigation of greenhouses, orchards, flower beds, or green parking lots. Ideal for so-called micro irrigation, where a strong stream of water is not needed, and it moistens the root system of the grass directly with gentle dripping.
For each branch of the subsurface hose, it is necessary to install an air release valve, which prevents soil from being sucked back into the drippers by back pressure. The valve is placed at the highest point, ideally via a saddle clamp right after the solenoid valve.
If you don't need the whole 100m package, you can also find cut versions of 5 meters in our offer.
RB Subsurface is a two-layer pipe with pressure compensation, high resistance to mechanical and chemical influences. It is UV stabilized, which protects the hose from aging, and its two-layer design provides greater flexibility, which prevents kinking.

If you don't need or won't use the whole 100m package of pipe, you can also find cut hoses in our offer (in 5-meter lengths).

Recommendation: The Subsurface drip irrigation pipe is installed to a depth of approximately 8cm and the individual hoses should be spaced 33 cm apart, the same as the emitter spacing.

Maximum length of the irrigation line per 1 section (hose with 33cm spacing):

Technical properties of the product

RB Subsurface is a two-layer pipe with pressure compensation, high resistance to mechanical and chemical influences. It is UV stabilized, which protects the hose from aging, and its two-layer design provides greater flexibility, which prevents kinking.

For the water distribution for automatic irrigation and water supply to sprinklers, underground hoses are used.