Senior 10" TRIO Filter Set. Complete 1" Connection. Filtration of Impurities, Chlorine and Odor (CB-AF CTO) - Water Treatment Filter

Product detailed description

This value-for-money set includes: 1x Senior 10" TRIO 1" filter 1x filter wrench 1+1x spacer rings for filter cartridges 1x Triplex filter holder 1x 10" RL SX 50mcr mechanical cartridge (washable) 1x 10" FA 25mcr cartridge (wound) 1x CB-AF-CTO 10SX cartridge (carbon) 2x 1" MF,P ball valve 2x 32x1" ZV to PE transition Description of the SENIOR 10" TRIO filter: The SENIOR TRIO filter is used for the treatment of drinking and utility water in households and industry. Uses cartridges marked SX (three-stage filtration). Technical parameters: Max. operating pressure: 8 bar Max./min. water temperature: 45°C/4°C Filter housing: PET Filter head: PP Sealing O-ring: EPDM Inlet/outlet thread: brass CW 614 N Dimensions (H x W x D) in mm: 325 x 336 x 107 Description of the 10" RL SX mechanical cartridge: The washable RL-SX filter cartridge is made of polypropylene and a 50 mcr polyester filter mesh. The cartridge is suitable for capturing mechanical impurities. A filter with an RL cartridge is used: on the inlet pipe into the building before an individual appliance as protection for filter cartridges with finer filtration A rinsable, i.e. reusable, cartridge for capturing mechanical impurities larger than 50mcr is used as the first and basic protection of the water system and all connected appliances. In the event of greater contamination or higher demands on cleaning quality, we recommend installing an ATLAS DUO filter with a second mechanical cartridge (50, 25, 5, 1 mcr). The service life of the filter cartridge is 24 months; it needs to be rinsed every three months. Installation: into the pipe on the main water supply before or after the pump anywhere filtration of particles smaller than 50 mcr is needed Technical information: Max. temperature: 45ºC Max. flow rate (l/h): 2500 Dimensions (mm): 250 x 70 x 30 Manufacturer: ATLAS Filtri, Italy Description of the 10" FA wound filter cartridge: A filter cartridge made of wound polypropylene fiber, high-efficiency filtration of fine particles of rust, sand and grit. A single-use cartridge for capturing mechanical impurities larger than 25 mcr is used as basic protection for the water system and all connected appliances. In the event of greater contamination or higher demands on cleaning quality, we recommend installing an ATLAS DUPLEX filter with a second mechanical cartridge (50, 25, 5, 1 mcr). Suitable for drinking water. Service life: 3-6 months, depending on the level of impurities in the water, maintenance-free. Installation: into the pipe on the main water supply after the pump anywhere filtration of particles smaller than 25 mcr is needed Technical information: Max flow rate (l/h): 2000 Dimensions (mm): 250 x 61 x 28 Max. temperature: 45°C. Manufacturer: ATLAS Filtri, Italy Description of the CB-AF-CTO filter cartridge: The CB-AF-CTO 10SX chlorine filter cartridge with activated carbon reduces the chlorine content in water and removes odor from drinking water. It is filled with activated carbon to reduce odor and bad taste, pesticides, chlorine and chlorinated compounds, and volatile organic substances. The service life of the CB-AF-CTO 10SX chlorine filter cartridge is 3-6 months, depending on water composition. The CB-AF-CTO 10SX cartridge is made of pressed carbon derived from coconut shells and is intended for use before the final point of water use. It filters fine impurities and sediments. Max. temperature: 45ºC Max. flow rate (l/h): 230 Dimensions (mm): 248 x 70 x 26