Senior 10" TRIO filter set. Complete 3/4" connection. Filtration of impurities, iron and manganese reduction (FE 10" SX) Atlas Filtri for household water treatment

Product detailed description

This discounted set includes: 1x Senior 10" TRIO filter 3/4" 1x filter wrench 1+1x spacer rings for the filter cartridges 1x Triplex filter holder 1x mechanical cartridge 10" RL SX 50mcr (washable) 1x cartridge 10" FA 25mcr (wound) 1x 10" FE cartridge for deironing 2x ball valve 3/4" MF,P 2x adapter to PE 25x3/4" ZV Description of the SENIOR 10" TRIO filter: The SENIOR TRIO filter is used for treating drinking and utility water in households and industry. It uses cartridges marked SX (three-stage filtration). Technical parameters: Max. working pressure: 8 bar Max./min. water temperature: 45°C/4°C Filter housing: PET Filter head: PP Sealing O-ring: EPDM Inlet/outlet thread: brass CW 614 N Dimensions (H x W x D) in mm: 325 x 336 x 107 Description of the 10" RL SX mechanical cartridge: The washable RL-SX filter cartridge is made of polypropylene and a polyester filter mesh 50 mcr. The cartridge is suitable for capturing mechanical impurities. A filter with an RL cartridge is used: on the inlet pipe into the building in front of an individual appliance as protection for filter cartridges with finer filtration The rinsable, i.e. reusable, cartridge for capturing mechanical impurities larger than 50mcr is used as the first and basic protection of the water system and all connected appliances. In the case of heavier contamination or higher demands on cleaning quality, we recommend installing an ATLAS DUO filter with a second mechanical cartridge (50, 25, 5, 1 mcr). The service life of the filter cartridge is 24 months; it needs to be rinsed every three months. Installation: in the pipe on the main water supply before or after the pump anywhere filtration of particles smaller than 50 mcr is needed Technical information: Max. temperature: 45ºC Max. flow rate (l/h): 2500 Dimensions (mm): 250 x 70 x 30 Manufacturer: ATLAS Filtri, Italy Description of the 10" FA wound filter cartridge: A filter cartridge made of wound polypropylene fibre, high-efficiency filtration of fine particles of rust, sand and grit. A disposable cartridge for capturing mechanical impurities larger than 25 mcr is used as basic protection for the water system and all connected appliances. In the case of heavier contamination or higher demands on cleaning quality, we recommend installing an ATLAS DUPLEX filter with a second mechanical cartridge (50, 25, 5, 1 mcr). Suitable for drinking water. Service life: 3-6 months, depending on the level of impurities in the water, maintenance-free. Installation: in the pipe on the main water supply after the pump anywhere filtration of particles smaller than 25 mcr is needed Technical information: Max flow rate (l/h): 2000 Dimensions (mm): 250 x 61 x 28 Max. temperature: 45°C. Manufacturer: ATLAS Filtri, Italy Description of the FE 10" SX filter cartridge: The FE 10" SX filter cartridge is designed to reduce iron content using a removable container filled with oxidising resin. As water flows through, it accelerates the oxidation of iron. Highest efficiency is achieved at the final point of water use with slow flow. The resin can be regenerated by a strong backwash in the regeneration tank. The resin is resistant to chlorine. Service life: approx. 800L (largely dependent on water composition) Max. temperature: 45°C Max. flow rate: 50l/h. Keep out of reach of children.