Set of Leveling Clips SIXTOL SX3109 Level System T-Hold 1mm 1000pcs

Product detailed description

Set of quality LEVEL SYSTEM T-HOLD leveling clips for aligning tiles and cladding. These clips are used together with leveling wedges and pliers during tile installation to achieve a level surface - insert clips into the joints according to the joint width, insert a wedge into the clip and using special leveling pliers align the tiles or cladding into one plane. Once the adhesive under the tiles hardens, break off the clips with a rubber mallet, fill in the joints and you're done. Wedges, pliers and mallet are not included in this set and need to be purchased separately if needed.
Simple, fast and precise laying of cladding and tiles
Removes height differences between cladding and tiles, so-called lippage
Suitable for tiles and cladding of all materials and shapes
Usage:
1. During installation, insert clips into the joints between cladding or tiles with a width corresponding to the desired joint width.
2. Insert wedges into all clips.
3. Using the leveling pliers, pull the first wedge into the clip until the tiles are level.
4. According to the first wedge, tighten the fixing screw on the pliers so that the rest of the tiles or cladding are pulled with the same force.
5. Tighten the remaining wedges.
6. After the adhesive has hardened (usually after 24 hours), remove the clips by striking them from the side in the direction of the joint with a rubber mallet.
Note: Wedges can be reused.
Note: For proper removal of the clips with the mallet, the joint must be clean.
Technical parameters:
Thickness: 1 mm
Width: 36 mm
Height: 40 mm
Material: plastic
For tiles/cladding thickness: 4 - 15 mm
Package contents:
1000 x Leveling clips 1 mm