Single-module water softener HydroSoft ECONOMY 1.5 m³/h
Code: DNM_120V-HYS34Product detailed description
Single-module HydroSoft ECONOMY water softener for professional use
The industrial single-module HydroSoft ECONOMY water softener with a flow capacity of 1.5 m³/h is suitable for locations where water consumption is not continuous. This means, for example, that there is no water consumption during the night, and after the capacity is used up, the unit can automatically start regeneration of the cation exchange softening resin. This is important especially because during regeneration the control head does not let any water through into the system.
The automatic control head type HYS-1 ensures the entire regeneration process is fully automatic – without the need for intervention or supervision by a maintenance technician.
The regeneration time can be set to any hour when there is no water consumption (usually set to nighttime hours).
The volume of treated water is monitored by a small water meter turbine located at the outlet of the control head. The only thing that needs to be checked regularly is the amount of salt in the brine tank, to always ensure a sufficient volume for trouble-free automatic regeneration.
The size of the unit should be chosen based on the required capacity so that regeneration does not occur more often than every 6 hours – this is the time needed for the salt to fully dissolve. It is optimal if regeneration occurs 1–2 times a week or once a day with higher water consumption.
Tested and approved for contact with drinking water
The HydroSoft® water softener has been tested and evaluated in an authorized laboratory, and based on the documented results of leaching test analyses and applicable legislation, it clearly meets the requirements for products intended for contact with drinking water in accordance with regulations on hygienic requirements for products coming into contact with drinking water and for water treatment.
We recommend
- Before the water softener, we recommend installing a mechanical pre-filter, which prevents the ingress of floating impurities (sand, rust, clay, etc.) that could damage the mechanical parts of the softening unit.
- To select the correct size, you need to know the water hardness value, the peak hourly and average monthly water consumption, and last but not least, also take into account other values such as iron, manganese, ammonia, and organic water contamination. For this, it is necessary to have, or if you don't have it, to have a water analysis performed.
If you would like help determining the correct size, feel free to contact us.
Parameters
| Connection size | 3/4"- In/Out | 1/2"- Drain | 3/8"- Brine | ||||
| Softening capacity | 120 m³×°dH | ||||
| Flow capacity | 1.1 - 1.5 mAdditional parameters
Product ratingBe the first who will post an article to this item! DiscussionBe the first who will post an article to this item!
Vytvořil Shoptet | Design Shoptak.cz.
>
>
|