SIXTOL LEVEL SYSTEM PRESS Leveling Clips Pliers

Product detailed description

High-quality LEVEL SYSTEM PRESS leveling pliers for leveling tiles and cladding. Laying tiles level is very easy with LEVEL SYSTEM PRESS pliers - insert clips into the joints according to the joint width, insert a wedge into the clip and use the special leveling pliers to align the tiles or cladding into one level. Once the adhesive under the tiles hardens, break off the clips using a rubber mallet, fill in the joints and you are done.
- Simple, fast and precise laying of cladding and tiles
- Removes height differences between cladding and tiles, so-called lippage
- Suitable for tiles and cladding of all materials and shapes
Usage:
1. During laying, insert clips with a width according to the required joint width into the joints between the cladding or tiles.
2. Insert wedges into all clips.
3. Use the leveling pliers to pull the first wedge into the clip until the tiles are level.
4. Based on the first wedge, tighten the fixing screw on the pliers so that the rest of the tiles or cladding are pulled with the same force.
5. Tighten the remaining wedges.
6. Once the adhesive has hardened (usually after 24 hours), remove the clips by striking them from the side in the direction of the joint with a rubber mallet.
Note: The wedges can be reused.
Note: For proper removal of the clips with the mallet, the joint must be clean.
Technical parameters:
- Pliers length: 235 mm
- Max. pliers opening: 70 mm
- Material: PP handle + galvanized steel
Package contents:
- 1 x Leveling clips pliers