SIXTOL SX3102 Level System Wedge Set of Levelling Wedges 100pcs

Product detailed description

A set of quality LEVEL SYSTEM WEDGE levelling wedges for aligning tiles and cladding, consisting of 100 levelling wedges. These wedges are used together with levelling clips and pliers during tile laying to achieve a level surface - you insert the clips into the joints according to the joint width, insert the wedge into the clip, and using special levelling pliers you align the tiles or cladding into one level. Once the adhesive under the tiles has set, you knock off the clips with a rubber mallet, fill in the joints and you are done. Clips, pliers and mallet are not included in this set and need to be purchased separately if needed.
Simple, fast and precise laying of cladding and tiles
Removes height differences between cladding and tiles, so-called lippage
Suitable for tiles and cladding of all materials and shapes
The wedges can be reused
Usage:
1. During laying, insert clips of the width corresponding to the required joint width into the joints between the cladding or tiles.
2. Insert wedges into all clips.
3. Using levelling pliers, pull the first wedge into the clip until the tiles are level.
4. Based on the first wedge, tighten the fixing screw on the pliers so that the rest of the tiles or cladding are pulled with the same force.
5. Tighten the rest of the wedges.
6. Once the adhesive has set (usually after 24 hours), remove the clips by hitting them from the side in the direction of the joint with a rubber mallet.
Note: The wedges can be reused.
Note: For proper removal of the clips with the mallet, the joint must be clean.
Technical parameters:
Dimensions (L x W x H): 90 x 21 x 15.5 mm
Package contents:
100 x Levelling wedges