SIXTOL SX3103 Level System T-Hold Levelling Clips Set 1mm 200pcs

Product detailed description

Set of quality LEVEL SYSTEM T-HOLD levelling clips for aligning tiles and cladding. These clips are used in combination with levelling wedges and pliers during tile laying to achieve a level surface - insert the clips into the joints according to the joint width, insert the wedge into the clip and use special levelling pliers to align the tiles or cladding into one plane. Once the adhesive under the tiles has set, knock off the clips using a rubber mallet, fill the joints and you're done. Wedges, pliers and the mallet are not included in this set and need to be purchased separately as needed.
Simple, fast and precise laying of tiles and cladding
Removes height differences between tiles and cladding, so-called lippage
Suitable for tiles and cladding of all materials and shapes
Usage:
1. During laying, insert clips with a width corresponding to the required joint width into the joints between the cladding or tiles.
2. Insert wedges into all clips.
3. Using the levelling pliers, pull the first wedge into the clip until the tiles are level.
4. Based on the first wedge, tighten the fixing screw on the pliers so that the rest of the tiles or cladding are pulled with the same force.
5. Tighten the remaining wedges.
6. After the adhesive has set (usually after 24 hours), remove the clips by striking them from the side with a rubber mallet in the direction of the joint.
Note: The wedges can be reused.
Note: For proper removal of the clips with the mallet, the joint must be clean.
Technical parameters:
Thickness: 1 mm
Width: 36 mm
Height: 40 mm
Material: plastic
For tile thickness: 4 - 15 mm
Package contents:
200 x Levelling clips 1 mm