SIXTOL SX3104 Level System T-Hold Levelling Clips Set 2mm 200pcs

Product detailed description

Set of quality LEVEL SYSTEM T-HOLD levelling clips for aligning tiles and cladding. These clips are used together with levelling wedges and pliers when laying tiles flat - insert clips into the joints according to the joint width, insert a wedge into the clip and use special levelling pliers to align the tiles or cladding into one plane. Once the adhesive under the tiles has set, use a rubber mallet to knock off the clips, fill in the joints, and you're done. Wedges, pliers and mallet are not included in this set and need to be purchased separately as needed.
Simple, fast and precise laying of cladding and tiles
Removes height differences between cladding and tiles, so-called lippage
Suitable for tiles and cladding of all materials and shapes
Usage:
1. During laying, insert clips into the joints between cladding or tiles with a width according to the required joint width.
2. Insert wedges into all clips.
3. Use levelling pliers to pull the first wedge into the clip until the tiles are level.
4. According to the first wedge, tighten the fixing screw on the pliers so that you can pull the rest of the tiles or cladding with the same force.
5. Tighten the remaining wedges.
6. After the adhesive has set (usually after 24 hours), remove the clips by hitting them from the side in the direction of the joint with a rubber mallet.
Note: Wedges can be reused.
Note: For proper removal of clips with the mallet, the joint must be clean.
Technical parameters:
Thickness: 2 mm
Width: 36 mm
Height: 40 mm
Material: plastic
For tiles/cladding thickness: 4 - 15 mm
Package contents:
200 x Levelling clips 2 mm