SIXTOL SX3105 Level System T-Hold Levelling Clips Set 3mm 200pcs

Product detailed description

Set of quality LEVEL SYSTEM T-HOLD levelling clips for aligning tiles and cladding. These clips are used in combination with levelling wedges and pliers during tile installation to achieve a level surface - insert the clips into the joints according to joint width, insert the wedge into the clip and use special levelling pliers to align the tiles or cladding into one plane. Once the adhesive under the tiles has set, knock off the clips with a rubber mallet, fill in the joints and you're done. Wedges, pliers and mallet are not included in this set and need to be purchased separately as needed.
Simple, fast and precise installation of cladding and tiles
Removes height differences between cladding and tiles, so-called lippage
Suitable for tiles and cladding of all materials and shapes
Usage:
1. During installation, insert clips with a width corresponding to the required joint width into the joints between the cladding or tiles.
2. Insert wedges into all clips.
3. Use the levelling pliers to tighten the first wedge into the clip until the tiles are level.
4. According to the first wedge, tighten the fixing screw on the pliers so that the rest of the tiles or cladding are pulled with the same force.
5. Tighten the remaining wedges.
6. Once the adhesive has set (usually after 24 hours), remove the clips by hitting them from the side in the direction of the joint with a rubber mallet.
Note: The wedges can be reused.
Note: For proper removal of the clips with the mallet, the joint must be clean.
Technical parameters:
Thickness: 3 mm
Width: 36 mm
Height: 40 mm
Material: plastic
For tiles/cladding thickness: 4 - 15 mm
Package contents:
200 x Levelling clips 3 mm