SIXTOL SX3107 Level System T-Hold Levelling Clips Set 2mm 500pcs

Product detailed description

A set of quality LEVEL SYSTEM T-HOLD levelling clips for levelling tiles and cladding. These clips are used together with levelling wedges and pliers during tile laying to achieve a level surface - insert clips into the joints according to the joint width, insert a wedge into the clip and use special levelling pliers to level the tiles or cladding into one plane. Once the adhesive under the tiles has hardened, use a rubber mallet to knock off the clips, fill in the joints and you are done. Wedges, pliers and mallet are not included in this set and must be purchased separately as needed.
Simple, quick and precise laying of cladding and tiles
Removes height differences between cladding and tiles, so-called lippage
Suitable for tiles and cladding of all materials and shapes
Usage:
1. During laying, insert clips with a width corresponding to the desired joint width between the cladding or tiles.
2. Insert wedges into all clips.
3. Using levelling pliers, tighten the first wedge into the clip until the tiles are level.
4. According to the first wedge, tighten the fixing screw on the pliers so that the rest of the tiles or cladding are tightened with the same force.
5. Tighten the remaining wedges.
6. After the adhesive has hardened (usually after 24 hours), remove the clips by hitting them from the side in the direction of the joint with a rubber mallet.
Note: Wedges can be reused.
Note: For proper removal of clips with the mallet, the joint must be clean.
Technical parameters:
Thickness: 2 mm
Width: 36 mm
Height: 40 mm
Material: plastic
For tiles/cladding thickness: 4 - 15 mm
Package contents:
500 x Levelling clips 2 mm