SIXTOL SX3108 Level System T-Hold Levelling Clips Set 3mm 500pcs

Product detailed description

A set of quality LEVEL SYSTEM T-HOLD levelling clips for aligning tiles and cladding. These clips are used together with levelling wedges and pliers during tile laying to keep the tiles level - insert clips into the joints according to the joint width, insert a wedge into the clip and use special levelling pliers to align the tiles or cladding into one plane. Once the adhesive under the tiles has hardened, use a rubber mallet to knock off the clips, fill the joints and you're done. Wedges, pliers and the mallet are not included in this set and need to be purchased separately if needed.
Simple, fast and precise laying of tiles and cladding
Removes height differences between tiles and cladding, so-called lippage
Suitable for tiles and cladding of all materials and shapes
Usage:
1. During laying, insert clips of the width corresponding to the required joint width into the joints between the tiles or cladding.
2. Insert wedges into all clips.
3. Use the levelling pliers to pull the first wedge into the clip until the tiles are level.
4. Based on the first wedge, tighten the fixing screw on the pliers so that the rest of the tiles or cladding are pulled with the same force.
5. Tighten the remaining wedges.
6. After the adhesive has hardened (usually after 24 hours), remove the clips by hitting them from the side in the direction of the joint with a rubber mallet.
Note: The wedges can be reused.
Note: For proper removal of the clips with the mallet, the joint must be clean.
Technical parameters:
Thickness: 3 mm
Width: 36 mm
Height: 40 mm
Material: plastic
For tiles/cladding thickness: 4 - 15 mm
Package contents:
500 x Levelling clips 3 mm