Solar Controller VOLT SOL MPPT 60A 12/24/36/48V

Product detailed description

* Download the app:
Solarlife on the Apple Store for iOS
SolarLifeBT on Google Play for Android
The SOL MPPT 60A (12-24-36-48V) solar controller is designed for charging batteries from a connected set of solar panels. This modern and multifunctional device uses the latest and most efficient MPPT charging technology.
By optimizing the charging process, the controller effectively extends battery life compared to standard PWM controllers.
The SOL MPPT 60A model is equipped with a wireless communication function that allows remote control and monitoring of the controller's operating parameters.
Key features:
Advanced MPPT (Max Power Point Tracking) technology.
Conversion/tracking efficiency > 99.9%
Clear LCD display showing the most important operating parameters
Automatic voltage detection of the connected 12/24 V battery
For use with gel, AGM, lithium, and liquid electrolyte batteries
All LiFePO4 battery parameter settings are available only through the smartphone app.
Temperature sensor with automatic temperature compensation (if the temperature exceeds the set value, the charging current is reduced to lower the temperature)
Four-stage charging: MPPT, BOOST, equalization, float
Multiple load control modes: always on, dusk to dawn, night only, and manual
Controller operation via a dedicated smartphone app
Fully automatic protection (short circuit, temperature, overload)
When charging batteries with the controller, make sure to select the appropriate battery type in the controller settings.
Failure to use the appropriate battery charging mode may result in premature wear, damage, and loss of warranty. Additionally, when operating in photovoltaic systems (cyclic battery charging), we recommend using batteries best suited for this purpose, such as GEL VPRO SOLAR, DEEP CYCLE VPRO SOLAR, or lithium LiFePO4.
In photovoltaic installations (cyclic charging), we do not recommend using maintenance-free AGM batteries (e.g. AGM series, AGM OPTI, AGM VPRO). Such batteries are designed and work best in standby mode (backup voltage, UPS systems).
Technical parameters:
Maximum charging current: 60 A
Battery voltage: 12V/24V/36V/48V
Maximum panel voltage: 150V
Maximum current from panel Imp: 60A
Self power consumption: ≤16mA (12V); ≤12mA (24/36/48V)
For batteries: AGM, GEL
Boost voltage: 14~59.2V (at 25°C)
Equalization voltage: 14~60V (at 25°C)
Float voltage: 13~58V (at 25°C)
Low voltage disconnect: 10.8~11.8V / 43.2~47.2V
Reconnect voltage: 11.4~12.8V / 45.6~51.2V
Overload protection: 15.8~62.3 V
Temperature compensation: -4.17 mV/K per cell (boost, offset) -3.33 mV/K per cell (float voltage)
Dusk/dawn detection voltage: 5/10 V
Protection rating: IP32
Dimensions: 262x186x97 mm
Weight: 3 kg