Solar Inverter GETI GWH01 4000W MPPT for PV Water Heating

Product detailed description

The GETI GWH01 solar inverter is especially suitable for use in photovoltaic water heating systems.
Save costs and heat water using solar energy today. Thanks to the GETI GWH01 solar inverter with automatic grid switching, you can significantly reduce your hot water heating costs.
The GETI GWH01 4000W MPPT inverter, developed for PV water heating, allows direct use of photovoltaic panel systems to power resistive heating devices such as electric boilers, water heaters, heating mats, water heating, etc. The inverter is also equipped with an AC input, which allows it to be connected to the mains voltage and heat water even when solar radiation is insufficient for heating.
Note: The GETI GWH inverter is only suitable for resistive loads with a bimetallic thermostat (not suitable for electronically controlled thermostats!)
The inverter output (L, N) must not be connected to the mains, or to earth/ground!
The system is simple, requiring only the connection of the appropriate number of photovoltaic panels with a max. power of 4000 W and an operating voltage of 160 ~ 350V DC, mains voltage of 230V AC, and connection to a resistive load, e.g. a heating spiral, electric boiler, electric radiator or underfloor heating, plus protective elements.
The direct current generated by the panels, which cannot be fed directly into heating devices, is converted in the inverter into alternating current, which can be used to power heating devices.
The maximum system output is 4000 W. The inverter has a priority input from the photovoltaic panels, and if this voltage drops below 120V, water heating will be powered from the 230V AC mains.
Product parameters:
- solar inverter for heating hot water using a resistive load (heating spiral, boiler)
- automatic switching between sources (PV / 230V AC mains)
- operating modes: PV only as an island system, or PV + mains
- silent operation ensured by passive cooling
- efficient maximum power point tracking on the panels using MPPT
- high efficiency > 99%
The GETI GWH01 inverter is equipped with an LED panel that informs the user of the inverter's current status:
- indication of water heating from PV panels
- indication of water heating from the 230V AC mains
- flood indication
- error status indication
Technical parameters:
- input voltage (VDC): 160 to 350 (VDC)
- input voltage (VAC): 230 V AC
- output voltage [VAC]: 0-260 V AC (VAC)
- maximum power: 4000 W
- load type: resistive with bimetallic thermostat (not suitable for electronically controlled thermostats!)
- resistive load value must not be lower than 13 Ohm
- MPPT function: YES
- PV panel connection: series or series-parallel
- priority input: PV panels
- backup input: 230V AC mains
- operating temperature: -25 °C ~ + 55 °C
- efficiency: > 99%
- cooling: passive
- input short-circuit protection
- overheat protection
- PV panel input connection: MC4 connectors
- 230V AC input connection: screw terminal
- 230V AC output connection: screw terminal
- material: aluminum + metal
- protection rating: IP65
- dimensions L x W x H [mm]: 250 x 155 x 80 mm
- weight: 3 kg
Package: 1 pc
Package contents: 1 pc GETI GWH01 4000W solar inverter