Solar pump control unit ZPS 18e - 01 ECO
Code: 713305SRelated products
Product detailed description
The electronics are equipped as standard with four temperature sensors and the ability to set various solar system control schemes.
All parts are insulated with a profiled polyurethane casing.
The design of the pump assembly allows for easy installation and quick start-up of the solar system.
The ZPS pump assembly uses the energy-saving Wilo-Yonos PARA pump in compliance with the European Union directive, together with the G422 electronic control unit, which - based on the displayed schemes - allows various hydraulic schemes to be set up in combination with different types of boilers and external devices.
The pump assembly is also fitted with a pressure switch that allows the pressure in the solar installation to be monitored.
Main functions:
- 4 temperature sensors
- electronic speed control of the circulation pump
- automatic medium flow rate setting
- heat balance readout option
- overheating protection setting option - holiday mode
- works together with a boiler or other heat source
Technical information:
- flow measurement method: electronic
- works together with the DHW circulation pump: yes
- left/right-hand connection option: no
- dimensions (h x w): 845 x 215
- operating range of net area of connected collectors: 3~18 m2
- max. operating temperature: 120°C
- max. working pressure: 6 bar
- max. flow rate: 21 l/min
Frequently asked questions
- How does this controller/control unit work? It compares the temperature at the solar collector with the temperature in the storage tank (or another heat consumer) and, when the collector is sufficiently warmer, switches on the solar circuit's circulation pump to transfer the collected heat to the tank - when the temperature difference is small or negative, the pump switches off again to prevent the tank from cooling back down.
- What sensors do I need for this controller? Typically at least one sensor on the collector (the hottest point) and one in the storage tank - you will find the exact number and type of sensors required in the technical documentation of the specific controller.
- Can the controller also manage several heat consumers (e.g. a pool as well as a tank)? With more advanced controllers, yes - these let you prioritise where the collected solar heat should go at any given moment, based on the current temperatures of the individual consumers.
- Does installation and setup have to be carried out by a professional? We recommend leaving the connection of the controller, sensors and pump into a working solar system to a solar systems professional, who will also ensure the correct initial setup of the controller's parameters.
Additional parameters
| Category: | Control units |
|---|---|
| Warranty: | 2 years |
| Weight: | 8 kg |
| Max. working pressure: | 6 bar |
| Compatibility with DHW Circulation Pump: | Yes |
| Flow Measurement Method: | elektronicky |
| Left or right-hand connection option: | no |
| Max. prietok: | 21 l/min |
| Max. working temperature: | 120°C |
| Size (H x W): | 845 x 215 |
| Working range of net area of connected collectors: | 3~18 m² |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
R
Rastislav
Rastislav
Ahoj, mám na streche ploché kolektory s celkovou plochou asi 14m2 a chcem vedieť, či táto jednotka ZPS 18e - 01 ECO zvládne ich riadenie bez problémov, alebo by som mal siahnuť po silnejšom riešení?
RF
Richard Fabo
Richard Fabo
Dobrý deň,
máme od r. 2013 túto zostavu, s regulátorom G422-P06.
Došlo k pokazeniu regulátora.
Je možné dodať len samotný regulátor (G-422-P06 [možno existuje aj v novšej verzii])?
Ak áno, koľko by stál a aký je čas dodania?
A
ATRIA.SK
ATRIA.SK
Dobrý deň,
mrzí ma to, ale tento tovar u nás nemáme dostupný.
Pekný deň.
L
Lukáš
Lukáš
Je tato čerpadlova jednotka skladom u vas hnet?
A
Atria.sk
Atria.sk
Dobrý deň,
nie, momentálne ju nemáme na sklade. Je objednaná u dodávateľa.
Pekný deň.