Submersible pump 3.5" IPRO PROFESSIONAL 3-016 - RTS for boreholes and wells, stainless steel, 1100W, 6000 l/h, head 90m

Product detailed description

Multi-stage submersible pump 3.5" IPRO PROFESSIONAL 3-016 has increased resistance to sand and other abrasive substances that may be present in the water. The designation RTS on the submersible pump stands for (Resistance To Sand = resistant to sand). This submersible pump with floating impellers can also be used in new or freshly drilled boreholes, wells, tanks, water reservoirs and collection shafts. It is also suitable for boosting pressure when installed in a distribution pipeline, as well as for domestic or industrial use and for irrigation or water spraying. Hydraulic part of the IPRO PROFESSIONAL 3-016 pump is separated from the motor (the pump is not built as a monoblock) - in the event of a fault, the pump can be easily disassembled. Any repair (carried out at our service centre) need not be expensive and is above all fast, which is a great advantage in the event of a fault. The pump is equipped with thermal protection - a fuse. Submersible pump 3.5" AQUA PRO 3-016 is also suitable for small and medium-sized fire-fighting stations, or as part of a domestic water system with a submersible pump. Submersible pump 3.5 AQUA PRO is a professional version of the already very successful 3.5 SDM type. Professional pumps of the AQUA PRO range can also be used in continuous operation (24/7), which is also a great advantage over hobby pumps or submersible pumps used mainly for domestic use. Structurally, AQUA PRO pumps are designed to be able to pump water from unusually deep wells or boreholes (up to 150 m) and to deliver the required amount of water reliably over the long term. Materials used: Suction/discharge nozzle: AISI 304 Housing: AISI 304 stainless steel Shaft and rotor: AISI 304 stainless steel Impeller: technologically improved pump-grade noryl Diffuser: reinforced polycarbonate Mechanical seal: Ceramic/SiC/NBR Bearings: NSK Operating conditions: Maximum liquid temperature: 35°C Maximum ambient temperature: 35°C Insulation class: F Operating mode: intermittent and/or continuous Protection: IP68 Motor speed: 2850 RPM Motor: oil-cooled Maximum number of starts per hour: 30