Submersible Pump 4" IPRO PROFESSIONAL 16/100T - RTS for Borehole and Well, Stainless Steel, 400V, 7500W, 25800 l/h
Code: PR_113481Related products
Product detailed description
Multistage submersible pump 4" IPRO PROFESSIONAL 16/100T has increased resistance to sand and other abrasive substances that may be present in the water. A submersible pump marked RTS stands for (Resistance To Sand). This submersible pump with floating impellers can also be used in new or freshly drilled boreholes, wells, tanks, water reservoirs and collection shafts. It is also suitable for increasing pressure when installed in a distribution pipeline, as well as for domestic or industrial use and for irrigation or water spraying. The hydraulic part of the 4" IPRO PROFESSIONAL 16/100T pump is separated from the motor (the pump is not built as a monobloc) - in case of a fault, the pump can be easily disassembled. Any repair (carried out at our service centre) does not have to be expensive and is above all fast, which is a big advantage in the event of a fault. The pump is equipped with thermal protection - a fuse. The 4" IPRO PROFESSIONAL 16/100T submersible pump is also suitable for small and medium-sized fire stations, or as part of a home water system with a submersible pump. Professional pumps of the IPRO PROFESSIONAL range can also be used in continuous operation ( 24 / 7 ) which is also a great advantage over hobby pumps or submersible pumps used mainly for domestic use. The IPRO PROFESSIONAL pumps are designed to be able to pump water from non-standard deep wells or boreholes ( up to 150m ) and to deliver the required amount of water reliably and over the long term. Materials used: Suction/discharge port: AISI 304 Housing: stainless steel AISI 304 Shaft and rotor: stainless steel AISI 304 Impeller: technologically improved pump-grade Noryl Diffuser: reinforced polycarbonate Mechanical seal: Ceramic/Sic/NBR Bearings: NSK Operating conditions: Maximum liquid temperature 35°C Maximum ambient temperature 35°C Insulation class F Operating mode - intermittent and/or continuous Protection - IP68 Maximum number of starts per hour: 30 Motor: oil-cooled Motor speed: 2850 RPMAdditional parameters
| Category: | Submersible water pumps, Professional submersible pumps |
|---|---|
| Weight: | 51.4 kg |
| Dimensions H x W x D (cm): | 296.1x10.08 |
| Maximum flow rate (l/min): | 430 |
| Pump design - voltage (V): | 400 V |
| Pump head (m): | 165 |
| Supply cable length (m): | 1 |
| EAN: |
Product rating
Be the first who will post an article to this item!
Discussion
List of discussions
M
Marek
Dobrý deň,
Rád by som sa s Vami poradil pri výbere čerpadla. Máme studňový vrt priemer 125mm, hĺbka 150m. Hľadáme čerpadlo pre domáce použitie, bude umiestnené v hĺbke cca. 140m. Hľadáme čerpadlo s prietokom okolo 40 litrov za minútu a výkonom cca. 1,5 – 2 kw. Na stránke atria.sk sme našli Ponorné čerpadlo 4" IPRO PROFESSIONAL 16/100T - RTS - ATRIA.SK, ktoré spĺňa požiadavky aj vysoko nad rámec požiadaviek, teda najmä ten prietok, ale nie je pri ňom uvedený výkon. Viete ho prosím uviesť? Máte k tomu nejakú údaje? Kto je prosím výrobcom tohto čerpadla? Prípadne by sta nám na základe vyššie uvedený parametrov vedeli odporučiť aj iné čerpadlo? Hľadáme spoľahlivé čerpadlo, pretože prípadná výmena alebo oprava by vzhľadom na hĺbku vrtu mohla byť komplikovaná. Za Vašu odpoveď vopred ďakujem.
S pozdravom
Marek
A
ATRIA.SK
Dobrý deň,
poprosíme, kontaktuje oficiálneho distribútora pre túto odbornú radu.
www.prodoshop.sk. Pekný deň.
