Submersible sludge/drainage pump Omnigena TIPI 400 AUTO for clean and slightly contaminated water with electronic float switch

Product detailed description

The Omnigena TIPI 400 AUTO submersible sludge/drainage pump is used for pumping out water from flooded and submerged spaces, tanks and wells. The pump is used in various areas depending on whether clean or slightly contaminated water is being pumped, mainly in households with intermittent operation. Max. solid particle permeability 5 mm. The device is characterised by low weight and compact size. As standard, the device is connected to a 10-metre power cable with a plug. The low-power motor does not produce too much noise that could disturb the surroundings. The Omnigena TIPI 400 AUTO submersible sludge/drainage pump is equipped with built-in thermal protection in case of overheating. The pump has a built-in electronic float switch, which allows it to be placed in narrow or hard-to-reach places. The Omnigena TIPI 400 AUTO submersible sludge/drainage pump can also work in automatic mode. The Omnigena TIPI 400 AUTO submersible sludge/drainage pump has two functions: automatic and manual. The pump’s operation in automatic mode is controlled by a slider on the body, which determines the activation level of the device. In automatic mode, the pump starts when the liquid level reaches the height marked by the slider. The electronic float switch turns the pump on when the liquid level rises and reaches a height of 15 cm from the base. After the liquid has been pumped out, the electronic float switch automatically switches the pump off when the liquid level is at a height of 6 cm from the bottom of the pump. Automatic mode requires no supervision. The Omnigena TIPI 400 AUTO submersible sludge/drainage pump can also work in non-automatic mode. In that case, however, the user must monitor the level themselves and switch off the pump manually after pumping. Thanks to a special solution of the hydraulic chamber, the TIPI 400 pumps out water, in manual mode, almost to the bottom of the surface on which it is placed. A flexible hose, which is fitted to the built-in discharge nozzle, must be connected to the device.