UHPS Heat Distribution Plate

Product detailed description

UHPS heat distribution plate for polystyrene, for dry underfloor heating. It is inserted into the polystyrene.

Pipe diameter: 16 mm

Material: aluminium

Overall height: 0.5 mm

Sheet size 1000 x 120 x 0.40 mm

The price shown is per 1 pc

1 package (box) contains 64 pieces

Consumption of distribution plates: approx. 70% of the pipe length 

All system boards feature a so-called "lock", which ensures each side of the board overlaps with the next board, preventing concrete from penetrating under the polystyrene.

On the inner side of the board, beneath the studs, there are 5 mm small protrusions that ensure the pipe is perfectly wrapped in the screed material, including from underneath. This ensures perfect heat transfer into the heating board around the entire circumference of the pipe.

More information is available at www.systemova-doska.sk, or you can find installation instructions for underfloor heating with frequently asked questions at www.systemova-doska.sk/podlahove-vykurovanie/

Frequently Asked Questions

• How do I choose the right thickness/type of system board? Go by the expected floor load - for ordinary residential spaces, boards for lower loads are sufficient, while for industrial premises, halls or car workshops (where vehicles or heavy loads pass through) you need a board with a higher maximum load capacity, usually with thicker insulation.
• How does the "lock" on the board edges mentioned in the description work? It is a shaped connection between the edges of adjacent boards that ensures they overlap without a gap when laid - this prevents liquid concrete from getting under the boards during the screed pour and avoids heat loss through gaps between individual pieces.
• What pipe diameter does the board support? The exact range is given in the technical parameters above - the studs (mushrooms) on the board are shaped so that the chosen pipe holds firmly in place once pressed in (it will not pop back out) even before the screed is poured.
• Why does the board have studs on the underside as well? These small studs ensure that the screed material wraps evenly around the pipe from underneath as well, not just from the sides - the result is better and more even heat transfer from the pipe into the floor around its entire circumference.
• Does the installation have to be carried out by a professional? Laying the boards themselves and fitting the pipes into them can be handled by a competent DIY enthusiast following the instructions; we recommend having the connection to the manifold and the commissioning of the heating circuit (including a pressure test before the screed is poured) checked by a professional.