Underfloor Heating Manifold WIGELL, 10 circuits, brass + manual key air vent

Product detailed description

The underfloor heating manifold is the main component for evenly distributing heat in underfloor heating systems. Manifold variants include different numbers of circuits, usually from 2 to 18, and are compatible with underfloor heating pipes with diameters of 16–20 mm.

Wigell manifolds can be mounted directly on the wall or, using the supplied brackets, into a manifold cabinet. The mounting position is arbitrary. Using compression fittings, you can connect PeX-AL-PeX or Pe-rt pipes to this manifold.

Product parameters

• Permissible liquid temperatures: -10 °C to 120 °C
• Max. working pressure: 4 - 6 bar
• Max. test pressure: 10 bar
• Measuring range: 0-5 l/min
• Flow rate: 1.12 m³/h
• Inlet and outlet connection: 1"
• Flow meters: dual-regulation with locking option

Advantages of Wigell manifolds

• Each manifold undergoes a pressure test, which ensures its reliability and long service life.
• You can choose a manual or automatic air vent.
• The cabinet size is precisely matched to the given number of circuits and fits perfectly.
• You can choose control valves in two variants with thermometer preparation, either angled or straight.
• The manifold is fitted with control valves, flow meters and air vents.

Video about the pressure test

This manifold assembly consists of

Heating water body:

• flow meters terminated with a nipple and a PEX 3/4 x 16 type coupling
• air vent and drain unit with a manual key air vent (an automatic air vent can also be used)

Return water body:

• thermostatic valves M30 x 1.5 - option to install thermal actuators
• nipples fitted with PEX 3/4 x 16 type couplings
• air vent and drain unit with a manual key air vent

Flow meter:

It is used to set the heating water flow rate in l/min and thus to balance the pressure differences of the individual heating circuits. Depending on the direction you turn the lower part of the flow meter, you decrease or increase the heating water flow rate, or shut it off completely. The water level on the transparent part of the flow meter shows the water flow in l/min. Max. operating pressure is 1 MPa.

Thermostatic valve:

Thermostatic valve inserts with manual heads are used to shut off individual heating circuits. These manual heads cannot be used to regulate the individual branches. The manual heads can be removed and replaced with electric actuators.

Air vent and drain unit:

It is used to vent the heating system. The air vent valve of this unit is manual (key-operated), and can be replaced with an automatic air vent valve.

What else to buy for the air vent?

Additional accessories are needed for correct connection. Below, choose the connection components that are fully compatible with this manifold:

• Recessed and surface-mounted manifold cabinets
• Mixing sets (WILO pump + ESBE valve) - for variants without a built-in pump
• Ball valves for connection without a circulation pump
• Compression fittings

For pipe installation, we also recommend purchasing:

• Underfloor heating pipes
• Underfloor heating foils
• Clips for fixing underfloor pipes
• Staplers and dispensers
• Expansion strips for the wall

Packaging and delivery method

The product will be delivered by standard parcel shipping and will be packaged to prevent damage during transport. The exact packaging method depends on the number of pieces ordered and other items in the order. A standalone manifold is most often packaged in a cardboard box and stretch film.