Victron Energy 1200VA 24V VE.Direct Inverter

Product detailed description

SINUS Phoenix 1200VA 24V VE.Direct Inverter
Victron Energy 24V/1200VA VE.Direct. Fully programmable pure sine wave inverter 24 V/1200 VA with toroidal transformer, built-in VE.Direct interface and ECO mode.
The Victron Energy inverter is an efficient and reliable inverter built on a proven and field-tested platform. The inverter features a robust toroidal transformer, which has been proving its reliability in Victron Energy inverters for many years.
Product features:
- Easily accessible terminals: installation is easier than ever, as the terminals are now more accessible to the installer.
VE.Direct:
The VE.Direct port can be connected to:
- a computer (VE.Direct to USB interface cable required)
- smartphones, tablets, MacBooks and other Apple and Android devices (VE.Direct Bluetooth Smart dongle required)
Fully configurable:
- Low battery alarm trigger and reset level
- Low battery shutdown and restart levels
- Dynamic cut-off: load-dependent shutdown level
- output voltage 210 - 245 V
- frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sensing level
Monitoring:
- Input and output voltage, load % and alarms
Proven reliability:
- Full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit resistant and protected against overheating, whether caused by overload or high ambient temperature.
High surge power:
- Needed to start loads such as inverters for LED bulbs, halogen lamps, refrigerators or power tools.
ECO mode:
In ECO mode, the inverter switches to standby mode when the load drops below a set value. In standby mode, the inverter switches on briefly every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter remains switched on.
Remote on/off:
A remote switch can be connected to a two-pole connector or between the plus and the left battery contact of the two-pole connector.
LED diagnostics:
The status LEDs can be used to diagnose the device, see the user manual.
Victron Connect:
The VictronConnect app is used to monitor, control and configure the inverter. The app can be installed on a phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via a USB interface with the VE.Direct port.
Technical parameters:
- 230 V AC +/- 3% 50 Hz or 60 Hz +/- 0.1%.
- continuous power at 25 ºC: 1200 VA / 1000 W
- Peak power: 2200 W
- maximum efficiency: 91 %
- own consumption at zero load: max. 8 W
- own consumption in ECO mode: max. 1.5 W
- 230 V AC connection: Schuko (CEE 7/4)
- Operating temperature range: -40 to +65 ºC (fan cooled)
- Humidity (non-condensing): max. 95
- Protection class: IP21
- weight: 7.4 kg
- Dimensions: 117 x 232 x 327 mm