WIGELL Floor Heating Manifold, 2 circuits, brass + manual air vent

Product detailed description

The underfloor heating manifold is the main component for even heat distribution in underfloor heating systems. Manifold variants include different numbers of circuits, usually from 2 to 18, and are compatible with underfloor heating pipes with diameters of 16–20 mm.

Wigell manifolds can be mounted directly on the wall or, using the supplied brackets, into a manifold cabinet. The mounting position is arbitrary. Using compression fittings, you can connect PeX-AL-PeX or Pe-rt pipes to this manifold.

Product parameters

• Permissible fluid temperatures: -10 °C to 120 °C
• Max. working pressure: 4 - 6 bar
• Max. test pressure: 10 bar
• Measuring range: 0-5 l/min
• Flow rate: 1.12 m³/h
• Inlet and outlet connection: 1"
• Flow meters: dual-control with locking option

Advantages of Wigell manifolds

• Every manifold undergoes a pressure test, ensuring its reliability and long service life.
• You can choose a manual or automatic air vent.
• The cabinet size is precisely determined for the given number of circuits and fits perfectly.
• The control valves are available in two variants with thermometer preparation, either angled or straight.
• The manifold is fitted with control valves, flow meters and air vents.

Pressure test video

This manifold set consists of

Heating water body:

• flow meters terminated with a nipple and a PEX 3/4 x 16 coupling
• air vent and drain unit with a manual (key-operated) air vent (an automatic air vent can also be used)

Return water body:

• thermostatic valves M30 x 1.5 - possibility to install thermal actuators
• nipples with mounted PEX 3/4 x 16 couplings
• air vent and drain unit with a manual (key-operated) air vent

Flow meter:

It is used to set the heating water flow rate in l/min and thus to balance the pressure differences of the individual heating circuits. Depending on the direction of rotation of the lower part of the flow meter, you decrease or increase the flow rate of the heating water, or close it completely. On the transparent part of the flow meter, the water level shows the flow rate in l/min. Max. operating pressure is 1 MPa.

Thermostatic valve:

Thermostatic valve inserts with manual heads are used to shut off individual heating circuits. It is not possible to regulate individual branches with these manual heads. The manual heads can be removed and replaced with electric actuators.

Air vent and drain unit:

It is used to vent the heating system. The air vent valve of this unit is manual (key-operated), and can be replaced with an automatic air vent valve.

What else to buy for the air vent?

Additional accessories are needed for correct installation. Below, select the connection parts that are fully compatible with this manifold:

• Recessed and surface-mounted cabinets
• Mixing sets (WILO pump + ESBE valve) - for variants without a built-in pump
• Ball valves for connection without a circulation pump
• Compression fittings

When laying the pipes, we also recommend purchasing:

• Underfloor heating pipes
• Underfloor heating foils
• Clips for fastening floor pipes
• Staplers and dispensers
• Expansion tapes for the wall

Packaging and delivery method

We will deliver the product to you by standard parcel shipping and it will be packaged so that it is not damaged during transport. The actual packaging method depends on the number of pieces ordered and other items in the order. A single manifold will most often be packed in a cardboard box and stretch film.