Wolf CGS-24/200, 3-stage pump
Code: 8611408Z20Product detailed description
Wolf CGS-24/200 floor-standing gas condensing boiler with a stainless steel water heat exchanger and a 90-litre cylinder with precise hot water stratification (stratified cylinder)
- wall-mounted gas condensing boiler with minimal space requirements
- ideal for economical heating and efficient hot water production
- state-of-the-art condensing technology ensures high savings (most efficient during condensation - efficiency up to 110%), modulating burner achieving extremely low levels of combustion pollutants
- variants with modulated output from 3.2 to 50 kW
- clean and balanced design that adapts to any space
The Wolf CGS-24/200 boiler has a steel water cylinder protected by a certified-quality enamel coating. The 90 l cylinder incorporates a hot and cold water distribution system "Turbostop" to dampen water turbulence and achieve perfect temperature stratification (patent applied for). Radial guidance of the water flow in the cylinder ensures even filling and draining, providing a comfortable supply of hot water at a constant temperature. The performance parameters correspond to those of a traditional water heater with a volume of 160 or 200 l respectively, the hot water delivery (40 °C) during a 10-minute peak draw-off is 199 or 216 l respectively (depending on boiler output).
General parameters:
| TYPE | CGS-20/160 | CGS-24/200 | |
| Rated heat output at 80/60°C flow/return | kW | 19,0/22,9 | 23,1/27,6 |
| Rated heat output at 50/30°C flow/return | kW | 20,5 | 24,8/ - |
| Rated heat input | kW | 19,5 (23,5) | 23,8/28,5 |
| Min. heat output (modulated) at 80/60°C flow/return | kW | 5,6 | 7,1 |
| Min. heat output (modulated) at 50/30°C flow/return | kW | 6,1 | 7,8 |
| Minimum heat input (modulated) | kW | 5,7 | 7,3 |
| Dimensions | |||
| Width x height x depth | mm | 566 x 1 460 x 637 | |
| Flow connection, external thread | mm | 20 (G 3/4“) | 20 (G 3/4“) |
| Return connection, internal thread | mm | 20 (G 3/4“) | 20 (G 3/4“) |
| Domestic hot water connection | G 3/4“ | G 3/4“ | |
| Cold water connection | G 3/4“ | G 3/4“ | |
| Gas connection | R 1/2“ | R 1/2“ | |
| Air supply / flue gas discharge connection | mm | 95,5/63 | |
| Gas consumption | |||
| Natural gas H (Hi=9.5 kWh/m3 = 34.2 MJ/m3) | m3/h | 2,05 (2,47) | 2,50/3,00 |
| Gas pressure at the connection | |||
| Natural gas | mbar | 20 | |
| Heating | |||
| Flow temperature setting (factory setting) | °C | 75 | |
| Max. flow temperature up to approx. | °C | 90 | |
| Max. total water pressure | bar | 3,0 | |
| Heating water volume in the heat exchanger | l | 1,3 | |
| Rated volume in the DHW cylinder (equivalent rated volume) | l | 90 (160) | 90 (200) |
| Special flow rate "D" at delta T = 30 K | l/min | 23,2 | 25,2 |
| Continuous domestic hot water output | l/h (kW) | 563 (22,9) | 681(27,6) |
| Initial output | l/10 min | 199 | 216 |
| Max. total pressure | bar | 10 | |
| Domestic hot water temperature range (adjustable) | °C | 15-65 | |
| Corrosion protection of the domestic hot water heat exchanger | stainless steel | ||
| Corrosion protection of the domestic hot water cylinder | enamelling according to DIN 4753 | ||
| Total volume of the expansion vessel | l | 12 | |
| Gas charge pressure in the expansion vessel | bar | 0,75 | 0,72 |
| Available fan pressure | Pa | 90 | |
| Electrical connection | 230V / 50Hz | ||
| Protection rating | IPX4D | ||
| Total weight (without water) | kg | 99 | |
| Condensate quantity at 50/30°C | l/h | approx. 2.0 | |
| Condensate pH value | approx. 4.0 |
||
Additional parameters
| Category: | Wolf |
|---|---|
| Warranty: | 2 years |
| Product replaced by new one: | https://www.atria.sk/protherm-tiger-condens-20-26-kkz-42/ |
| The item has been sold out… | |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!