HydroSoft COMFORT 1.4 Water Softener
Code: DNM_60V-HYS1COMProduct detailed description
HydroSoft COMFORT 1.4 Water Softener for Professional Use
The single-module HydroSoft COMFORT 1.4 water softener is used for central treatment of hard water.
Water softening takes place continuously thanks to the automatic HYS-1-Comfort control head, which carries out the entire regeneration process fully automatically without the need for maintenance staff supervision. The control head usually performs regeneration at night after the set capacity has been used up.
The capacity, or volume of treated water, is monitored by a small water meter turbine at the outlet of the control head.
A great advantage of the control head is that it delivers raw water during regeneration, so if necessary, the household or building will not be left without water. Another advantage is the raw water blending function (this can be set directly on the control head). This function is used to keep a certain amount of calcium and magnesium in the water (hardness around 5 German degrees - 5 °dH).
When it comes to operation, it is important to make sure there is always a sufficient amount of salt in the brine tank, which is necessary for the regeneration process to run correctly.
The optimal size of the softening unit for a household should be chosen based on capacity so that the unit performs regeneration once, or at most twice a week. In this case, the cost ratio in terms of the price of the chosen unit size and salt consumption is most favourable.
Characteristics and functions of the HydroSoft Comfort softener
- Professional water softening - designed and set according to local conditions
- Economical and eco-friendly solution - low water and salt consumption for regeneration
- Pre-set device - no programming needed after installation
- Safety and reliability - overflow protection, smart functions
- Automatic and intelligent regeneration - Using a microprocessor and precise water meter (flow monitoring from as low as 2 l/min), water consumption is monitored, and based on this the control head sets the regeneration time so that you never run out of softened water.
- Countercurrent regeneration and skipped rinse - even lower water and salt consumption.
- Multilingual graphic LCD display - the device can be controlled in Czech, English, German, Hungarian, Serbian and Romanian
- Built-in blending - adjustable minimum water hardness value
- Space-saving - consists of 2 parts: a pressure tank with control head and a brine tank with a salt grid and protective tube (the tanks can be up to 3 m apart)
- Made in Slovakia - manufactured by Danum, s.r.o. based on many years of experience
+ 2 optional accessories
- Resin disinfection - Using the control head, the disinfection unit is connected directly to enable disinfection of the resin bed (can be ordered separately). This disinfection unit uses free chlorine generated from the salt solution to disinfect the softening media during each regeneration. This process is standard in several European countries.
- Bypass valve - It is possible to order a bypass valve, which allows the unit to be disconnected from the water system. This part can be useful in cases when the unit needs to be moved, for example when replacing the cation resin, painting walls behind the unit, and similar situations.
Technical parameters
- Softening capacity: 60 m³×°dH
- Flow capaci
Additional parameters
| Category: | Filtration |
|---|---|
| EAN: |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!