HydroSoft COMFORT 1.5 Water Softener
Code: DNM_120V-HYS34COMProduct detailed description
HydroSoft COMFORT 1.5 Water Softener for Professional Use
The single-module commercial water softener HydroSoft COMFORT 1.5 is used for the central treatment of hard water.
Water softening runs smoothly thanks to the automatic control valve HYS-34-Comfort, which carries out the entire regeneration process fully automatically without the need for maintenance supervision. The control valve usually performs regeneration during night hours once the set capacity has been used up.
The capacity, or rather the volume of treated water, is monitored by a small water meter turbine at the outlet of the control valve.
A major advantage of the control valve is that it supplies raw water during regeneration, so in case of urgent need, the household or building will not be left without water. Another advantage is the raw water blending function (this can be set directly on the control valve). This function ensures that a certain amount of calcium and magnesium remains in the water (hardness of around 5 degrees German hardness - 5 °dH).
Regarding operation, it is important to make sure there is always a sufficient amount of salt in the brine tank, which is essential for the proper course of regeneration.
The optimal size of the softening device for households should be chosen based on capacity so that the device performs regeneration once, or at most twice a week. This provides the most optimal cost ratio in terms of the price of the chosen unit size and salt consumption.
Characteristics and functions of the HydroSoft Comfort softener
- Professional water softening - designed and set according to local conditions
- Economical and eco-friendly solution - low water and salt consumption for regeneration
- Pre-set device - no programming required after installation
- Safety and reliability - overflow protection, smart functions
- Automatic and intelligent regeneration - Using a microprocessor and a precise water meter (flow monitoring from as low as 2 l/min), water consumption is monitored, and based on this, the control valve sets the regeneration time so that you never run out of softened water.
- Counter-current regeneration and skipped rinse - even lower water and salt consumption.
- Multilingual graphic LCD display - the device can be operated in Czech, English, German, Hungarian, Serbian and Romanian
- Built-in blending - adjustable minimum water hardness value
- Space-saving - consists of 2 parts: a pressure tank with control valve and a brine tank with a salt grid and protective tube (tanks can be up to 3 m apart)
- Made in Slovakia - manufactured by Danum, s.r.o. based on many years of experience
+ 2 optional accessories
- Resin disinfection - Using the control valve, the disinfection unit is connected directly, creating the possibility of disinfecting the resin bed (can be ordered separately). This disinfection unit uses free chlorine created from the salt solution to disinfect the softening media during every regeneration. This process is a standard in several European countries.
- Bypass valve - There is an option to order a bypass valve, which allows the device to be disconnected from the water supply system. This part can be useful in cases where the device needs to be moved, for example when replacing the cation resin, painting walls behind the device, and similar situations.
Technical parameters
<Additional parameters
| Category: | Filtration |
|---|---|
| EAN: |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!