Welding Inverter PROCRAFT SPI-320

Product detailed description

The Procraft SPI-320 welding inverter is designed for manual welding using MIG and MAG methods. IGBT power transistors guarantee long trouble-free operation. Welding current regulation in the range of 20-160 A allows setting optimal parameters when working with different metals. Welding wire with a diameter of 0.6 to 1.0 mm can be used. It allows welding with inert or active gases. The current welding current is displayed using an LCD display. Included in the delivery is welding wire 0.8 mm (5 kg spool), MIG torch with cable, welding shield, cable with electrode holder, cable with grounding clamp, and a wire brush combined with a slag hammer.
For welding methods:
MMA (coated electrode)
MIG/MAG (CO2 etc., gas welding)
FCAW-Flux (flux-cored wire, without the use of gas)
TIG-Lift (non-consumable electrode – Requires purchase of a TIG torch)
Features:
HOT START - facilitates arc ignition by initially automatically increasing the ignition current compared to the originally set welding current value
ARC FORCE - stabilization of the ignited welding arc during welding depending on the length of the welding arc. If the electrode sticks when the arc shortens, the inverter increases the current. In the case of a long arc, the inverter reduces the current, creating time to bring the electrode closer to the material without the arc going out
ANTI STICK - automatic reduction of the welding current to a minimum if the electrode sticks, allowing the electrode to cool down and then be easily detached
Technical parameters:
Voltage, V: 220-240
Frequency, Hz: 50
For Co2 welding wire: 0.6, 0.8, 1.0 mm (5 kg spool), flux-cored wire (polarity reversal)
Weight, kg: 14
Current regulation range (A): 20-160
Duty cycle at maximum current (%): 40% at 40°C
Power input (kW): 5.3
Welding wire diameter (mm): 0.6-1.0
Welding electrode diameter (mm): 1.6-4.0
Protection rating: IP21S
Efficiency (%): 85
Roller diameter, mm: 200
Welding torch cable length, m: 3
Electrode holder (max. current, cable length): 200 A, 2.8 m
Grounding cable (max. current, cable length): 300 A, 2.2 m
Feed speed, m/min: 2.5-12
Duty cycle 40%: 160A
Duty cycle 60%: 113A / 19.65V
Duty cycle 100%: 88A / 13.4V