ATMOS D 80 P

Product detailed description

- 24-80 kW ecological, fully automatic pellet boiler

- it is designed for perfect pellet combustion in such a way that, depending on the customer's needs, a pellet burner is built into the left or right side of the boiler, which fully automatically draws pellets from the hopper using a screw conveyor. The fuel hopper is usually placed next to the boiler or in an adjacent room and can be of any size (standard 250, 500 or 1000L). Often a part of the boiler room is used as the fuel hopper, which is then sufficient for the entire heating season.

The pellet burner operation itself is fully automatic. If the burner receives a start command or heating is required, the conveyor feeds pellets into the burner nozzle and ignites them automatically with a heating element (spiral). After sufficient ignition of the pellets, the burner runs at the set output, in which it remains until the system (house) is heated. Then the burner switches off and the pellets in the burner chamber burn out completely. The burner is then ready for a new start. The whole cycle repeats whenever needed again.

The boiler output and other burner functions are controlled by electronic regulation, which allows the boiler operation to be adapted to the specific conditions of the whole system. Refilling pellets, cleaning the burner combustion chamber and removing ash is done once every 1 – 30 days, depending on the quality of the pellets and the size of the hopper.
If needed, the boilers can be equipped with an automatic ash removal system with an additional 68L or 135L ash box for comfortable heating with minimal maintenance.

Accessories required for the boiler:
burner A85	screw conveyor DRA50 - various lengths	pellet hopper - various