Avansa TH1
Code: AVANSA TH1Product detailed description
Avansa TH1 - modern mechanical thermostat
Thermostat installation:
- During installation, the thermostat must be disconnected from the mains.
- Reliable operation depends to a large extent on choosing the correct installation location.
- The thermostat should be installed away from heat sources (radiator, television, refrigerator) and away from direct sunlight, at least 1.5 m.
- It is not recommended to install it near doors, due to air currents.
- The connecting cable terminals are located inside the thermostat
- To access the terminals, remove the setting knob and remove the screws holding the cover in place.
- Connection is possible according to the diagram enclosed in the package.
Technical parameters:
Voltage: 16A 250V
Contact: AG 1000/1000
Operating temperature: +5°C ..... +30°C
Temperature difference: <1°C
Temperature gradient: 1°C/10 min.
Protection: IP20
Frequently Asked Questions
- How exactly should I choose the output of a AVANSA condensing boiler? The basis is the calculated heat loss of the heated building (most reliably from project documentation or an energy certificate). If you don't have a project, you can roughly estimate about 60-100 W per m² of floor area for a commonly insulated house built after 2000, or 100-150 W/m² for an older, non-insulated house - the exact figure varies depending on the number of floors, ceiling height, the number and quality of windows, and the building's orientation. An oversized boiler switches on and off more frequently (so-called cycling), which shortens its lifespan and reduces efficiency; an undersized boiler, on the other hand, cannot sufficiently heat the house on freezing days.
- Why is a condensing boiler more efficient than a conventional one? A condensing boiler additionally uses the heat hidden in the water vapor produced when burning gas - in a conventional boiler this escapes unused through the chimney, while in a condensing boiler it is cooled below the so-called dew point, the vapor condenses, and the released heat is returned to the heating circuit. Thanks to this, condensing boilers achieve an efficiency of approximately 105-110% relative to the calorific value of the gas, compared to the usual 85-92% for conventional boilers.
- What type of flue gas exhaust does this boiler need? Most modern condensing boilers are so-called turbo units (with a sealed combustion chamber) and require a concentric or separate flue gas exhaust and combustion air supply routed through an exterior wall or roof - so a functional chimney is not required. You can find the exact type and maximum length of the exhaust (for a diameter of 60/100 or 80/125 mm) in the technical documentation for the specific model, or consult our customer service.
- What does the ErP energy class stated for the boiler mean? This is a mandatory efficiency label for heating appliances under the EU ErP (Ecodesign) directive, similar to the energy labels on refrigerators. Condensing boilers commonly achieve class A, or even higher in combination with room controls (e.g. A+ when using weather-compensated control and a room thermostat).
- Can I install and connect this boiler myself? No. Connection to the natural gas supply, electrical network and flue gas exhaust is by law reserved exclusively for a person with the relevant authorization (most often an authorized service technician of the given brand or a gas appliance inspection technician). After installation, the boiler must be commissioned by the manufacturer's authorized service, which is usually also a condition for the warranty to be valid.
- What about service and warranty? Most manufacturers require a regular annual service inspection by an authorized service provider in order to keep the warranty valid even after its standard expiry (extended warranty with regular servicing is common especially for brands such as Vaillant, Protherm, Viessmann). You can find the exact warranty terms in the warranty card supplied with the boiler.
- What is included in the delivery of this specific product? The exact contents of the package (the boiler itself, possibly a hot water storage tank, room controls and other accessories in the case of a set) are stated in the product name and in its technical parameters above on this page.
Additional parameters
| Category: | manual thermostatsz el. siete, z kotla drôtový denný programz el. siete, z kotla drôtový denný program |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.14 kg |
| Thermostat design: | wired |
| Power supply: | z elektrickej siete, z kotla |
| Programovanie: | daily program |
| Rozmer balenia (mm): | 45/90/90 |
Video Avansa TH1
Product rating
Be the first who will post an article to this item!
The average product rating is 3,5 out of 5 stars.
2 ratings
5
4
3
2
1
Leave a rating
List of ratings
Discussion
List of discussions
D
Dominika
Dobrý den, namontovali jsme tento termostat na kotel. Když je knoflík na termostatu nastavený na 10 , tak se kotel sám zapne. Pokud se knoflíkem otočí na číslo 15, tak se kotel vypne a na čísle 20 se kotel jen nažhavi a vypne. Na vločce se sám zapíná a vypíná. Potřebuji poradit, nebo poslat stručný návod k použití termostatu.
A
ATRIA.SK
Dobrý deň,
návod môžete nájsť priamo na stránke v záložke súvisiace súbory. Pekný deň.
E
Erik
Keď objednám dnes,kedy to dostanem
A
ATRIA.SK
Dobrý deň,
tento tovar máme skladom, takže odosielame hneď. Pekný deň.
P
Peter
Dobrý bude fungovať na kotol leopard
A
ATRIA
Dobrý deň, áno termostat Vám bude fungovať. Prajem pekný deň.
B
Branislav
Dobry den, Prosim vas o zaslanie manualu k uvedenemu termostatu, kde bude aj schema zapojenia. Dakujem,
A
ATRIA
Dobrý deň, na mail Vám zasielam foto schémy zapojenia z termostatu v prílohe. Prajem pekný deň.
M
Milan
Dobrý deň chcel by som vedieť či je možné použiť tento termostat na elektrické podlahové vykurovanie Fénix . ? A potreboval by som schému zapojenia . Ďakujem
A
ATRIA
Dobrý deň, áno termostat je vhodný na uvedené podlahové vykurovanie. Schému zapojenia momentálne nemám k dispozícií. Je však súčasťou balenia. Pekný deň.
