Deformation screw DN20 (1" thread)
Code: 602VD20Related products
Product detailed description
Deformation screw DN 20 (1" thread)
The deformation screw is used to shape the stainless steel solar piping - this shaping creates a collar onto which the nut can then be fitted.
We recommend ordering deformation screws in packs of 2 - you will always keep the first one and lose the second one :)
ATTENTION!
THIS DEFORMATION SCREW IS ALREADY PART OF THE SOLAR TWIN PIPES, this specific set serves as a replacement part, or for an additional termination.
Frequently asked questions
- How do I check that this part fits my solar pipe/system? Compare the size/thread stated in this product's name with the diameter of your solar pipe or connection - solar components are usually manufactured in a few standard sizes (DN12, DN16, DN20, DN25).
- Why are solar components resistant to higher temperatures than standard heating parts? The heat-transfer fluid in a solar circuit can reach significantly higher temperatures than ordinary heating water under strong sunlight and low heat draw-off, so the seals, joints and components themselves are designed for higher temperature resistance.
- Does installation have to be carried out by a professional? We recommend leaving work on the solar circuit (especially connecting, sealing and filling the system) to a solar systems professional, since incorrect sealing or a leak can cause loss of heat-transfer fluid or air pockets in the system.
Additional parameters
| Category: | solar piping, stainless steel corrugated pipes |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.1 kg |
| Nominal diameter: | DN 20 |
Video Deformačná skrutka DN20
Product rating
Be the first who will post an article to this item!
The average product rating is 5,0 out of 5 stars.
1 rating
5
4
3
2
1
Leave a rating
List of ratings
Discussion
List of discussions
E
Erik
Erik
Dobry den.
Potrebujem deformacnu skrutku DN20 (1") https://www.atria.sk/deformacna-skrutka-dn20/
Mam cestu dnes cez ZA. Ak si ju objednam online, je mozny odber "hned" dnes? Alebo sa da kupit aj osobne, bez online objednavky?
Dakujem
Erik
A
ATRIA.SK
ATRIA.SK
Dobrý deň,
na sklade sú posledné 4 ks, môžete si vytvoriť objednávku a vyzdvihnúť ich. Pekný deň.
R
Rasťo
Rasťo
Mám nerez vlnovec DN25 na to zrejme potrebujem aj deštrukčnu skrutku 25. Máte ju v ponuke?
A
Atria.sk
Atria.sk
Dobrý deň.
deformačné skrutky máme dostupné len DN12. DN16 a DN20.
Pekný deň.
J
Jozef
Jozef
dn 20--------kolko je to v mm dn 16----------mm dakujem
A
ATRIA
ATRIA
http://www.oteple.sk/page.asp?prg=technicke_informacie&status=article&id=13
S
Stefan
Stefan
dobrý deň.chcem u vás objednať nerezové solárne potrubie rôznej dlžky napr. 1,3 m 1,7 m plus príslušnú deformačnú skrutku stým že si pomocou nej vytvarujem hrdlo na uchytenie matice.predávate potrubie aj v takýchto dlžkach a hlavne ma zaujíma či k tomu ešte treba nejaký prípravok a akú teplotu a tlak znesie takto vytvorené hrdlo.ďakujem.
A
ATRIA
ATRIA
Dobrý deň, Potrubie Vám vieme dodať aj v dĺžkach, ktoré uvádzate. Stačí požiadavku zadať do poznámky k objednávke. Hrdlo zvládne aj teplotu nad 100 stupňov. Pekný deň.