DRAŽICE OKC 200 NTR/Z
Code: 1107508101Related products
Protherm Panther Condens 25 KKO - 2021 model- wall-hung condensing boiler with the...
Avansa 2007 - programmable weekly thermostat The Avansa 2007 room...
Avansa AUTO 25/6/180 Circulation Pump The Avansa AUTO 25/60 180mm circulation...
Magnetic dirt separator for vertical and horizontal pipework CALEFFI DIRTMAG®...
Screw coupling 16x16 with screw union requires no pressing, for use with...
Product detailed description
Indirect-heating storage water heater DRAŽICE OKC 200 NTR/Z
Indirect-heating enamelled water heater for wall mounting with volumes of 80-200 liters. It has no electric heating.
Use:
- Indirect-heating water heater with a tubular coil heat exchanger - heating from an external heat source
- Supplying domestic hot water to households, apartments, family houses, small businesses, etc.
- Designed for year-round water heating from a gas boiler
- Vertical wall mounting - hanging water heater
- Without electric heating
Designed for year-round water heating from a gas boiler or solid fuel boilers.
Features:
- Powerful tubular exchanger - fast water heating
- Easy connection to all types of boilers
- High-performance exchanger guarantees uniform and fast water heating
- Heating from an external source with a maximum temperature of 110°C and pressure of 1 MPa
- Built-in DHW regulation - thermostat for controlling a three-way valve or circulation pump
- Inner tank made of steel with special enamel
- Polyurethane insulation with minimal heat losses
- Magnesium anode protects against corrosion
- Built-in safety valve
- Outlet for circulation
- For hanging installation in a vertical position
Designed for year-round water heating from a gas boiler or solid fuel boilers.
Technical parameters:
- Volume: 196 l
- Weight: 87 kg
- Water heater height: 1,300 mm
- Water heater diameter: 584 mm
- Active exchanger area: 1 m2
- Maximum operating pressure of the tank: 0.6 MPa
- Maximum operating pressure of the exchanger: 1 MPa
- DHW connection: JS 3/4"
- Heating water connection: JS 1"
- Setting range: up to 80 °C
- Recommended DHW temperature: 60 °C
- Electrical protection: IP 45
- Supply voltage: 1 P-EN AC 230 V/50 Hz
- Rated thermal output at heating water temperature of 80 °C and flow rate of 720 l/h: 24,000 W
- Heating time via exchanger from 10 °C to 60 °C: 28 min
- Heat losses: 1.4 kWh/24h
Additional parameters
| Category: | vertical indirect-heated water heater - OKC/NTR Z |
|---|---|
| Warranty: | 2 years |
| Weight: | 87 kg |
| The item has been sold out… | |
Avansa 2007 - programmable weekly thermostat The Avansa 2007 room...
Clamp-on thermostat AVANSA TH 2A for circulation pump used to...
The ADEX TTUV electronic thermostat consists of the TTUV1 control module, the...
Euroster 11 E, thermostat for pump (central heating or DHW) Programmable...
Avansa AUTO 25/6/180 Circulation Pump The Avansa AUTO 25/60 180mm circulation...
Brass manifold for underfloor heating, 6-way, 1" connection.Number of circuits:...
Protherm Gepard Condens 25 MKO- wall-hung condensing boiler with the option to...
Large Thermostatic Head - Varnished size: M30 x 1.5,control range: +6°C...
Two-way regulating thermostatic valve - 1/2"xEK; angle
Tesnenie threads ALPEX-GAS, IVAR.LOCTITE 55, balenie: 160 m,...
Brass threaded reducer 1/2" x 1/4" MF is the most commonly used...
Pipe insulation 18 mm (3/8") / 9mm Pipe insulation, or insulating foam for...
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
