EUROSTER Q7 TX

Product detailed description

Euroster Q7 TX - wireless thermostat with a weekly program (also known as EQ7 TX RX)

Euroster Q7 TX (also known as EQ7 TX RX) is a modern, intelligent wireless thermostat and offers several new and interesting features in its class. It allows setting up to nine different time zones for each day, and any temperature can be set for each zone. Settings can be copied between days, or saved to the RX receiver and loaded again at any time into this or another thermostat assigned to the system. Up to 6 thermostats can be assigned at once, and different heating switching priorities can be assigned to them. Control of the thermostat has been simplified by using a rotary dial on the outside of the device and an OK button to confirm values and enter the programming menu. All temperature values  and settings are clearly shown on the backlit display. Other advantages of the device include locking with a PIN code against unwanted tampering with the settings, a self-learning mode that recognizes temperature changes during the day and automatically sets the optimal temperatures at the required time, and two-way communication between the thermostat and the receiver, which is equipped with a display and shows the signal strength of each thermostat and the temperature in specific rooms. The switching signal receiver unit is designed to be plugged into a socket, from which it is also powered. The socket located on the receiver unit is pass-through only and does not allow switching of an appliance. The boiler is connected using a loose cable coming out of the receiver unit.

Features

• up to 9 different temperatures during the day wireless thermostat with a weekly program (also known as EQ7 TX RX)
• option to lock the thermostat with a PIN code
• programming in 0.1°C steps, min. time 5 minutes
• large backlit display
• thermostat powered by 2x AA batteries
• receiver powered by 230V 50Hz
• receiver with pass-through socket included
• signal range up to 30m indoors
• maximum switching current 5A

Package includes:

• Euroster Q7 TX thermostat
• RX plug-in receiver
• installation and user manual
• desk stand for thermostat, mounting material

Batteries not included.

Technical data:

Thermostat - transmitter

• power supply: 3V, 2x AA batteries
• temperature setting range: +5...+35°C
• temperature measurement and setting resolution: 0.1°C
• operating temperature: 0...+45°C
• dimensions: 82 x 82 x 35.6 mm
• design: Wall-mounted, white

Receiver

• wireless switching signal range: max. 30m indoors
• power supply: 230V 50Hz
• consumption: max. 1.3W
• Maximum switching current: 5A 230V 50 Hz
• Dimensions: 69 x 145 x 71MM

Frequently Asked Questions

• How exactly should I choose the output of a EUROSTER condensing boiler? The basis is the calculated heat loss of the heated building (most reliably from project documentation or an energy certificate). If you don't have a project, you can roughly estimate about 60-100 W per m² of floor area for a commonly insulated house built after 2000, or 100-150 W/m² for an older, non-insulated house - the exact figure varies depending on the number of floors, ceiling height, the number and quality of windows, and the building's orientation. An oversized boiler switches on and off more frequently (so-called cycling), which shortens its lifespan and reduces efficiency; an undersized boiler, on the other hand, cannot sufficiently heat the house on freezing days.
• Why is a condensing boiler more efficient than a conventional one? A condensing boiler additionally uses the heat hidden in the water vapor produced when burning gas - in a conventional boiler this escapes unused through the chimney, while in a condensing boiler it is cooled below the so-called dew point, the vapor condenses, and the released heat is returned to the heating circuit. Thanks to this, condensing boilers achieve an efficiency of approximately 105-110% relative to the calorific value of the gas, compared to the usual 85-92% for conventional boilers.
• What type of flue gas exhaust does this boiler need? Most modern condensing boilers are so-called turbo units (with a sealed combustion chamber) and require a concentric or separate flue gas exhaust and combustion air supply routed through an exterior wall or roof - so a functional chimney is not required. You can find the exact type and maximum length of the exhaust (for a diameter of 60/100 or 80/125 mm) in the technical documentation for the specific model, or consult our customer service.
• What does the ErP energy class stated for the boiler mean? This is a mandatory efficiency label for heating appliances under the EU ErP (Ecodesign) directive, similar to the energy labels on refrigerators. Condensing boilers commonly achieve class A, or even higher in combination with room controls (e.g. A+ when using weather-compensated control and a room thermostat).
• Can I install and connect this boiler myself? No. Connection to the natural gas supply, electrical network and flue gas exhaust is by law reserved exclusively for a person with the relevant authorization (most often an authorized service technician of the given brand or a gas appliance inspection technician). After installation, the boiler must be commissioned by the manufacturer's authorized service, which is usually also a condition for the warranty to be valid.
• What about service and warranty? Most manufacturers require a regular annual service inspection by an authorized service provider in order to keep the warranty valid even after its standard expiry (extended warranty with regular servicing is common especially for brands such as Vaillant, Protherm, Viessmann). You can find the exact warranty terms in the warranty card supplied with the boiler.
• What is included in the delivery of this specific product? The exact contents of the package (the boiler itself, possibly a hot water storage tank, room controls and other accessories in the case of a set) are stated in the product name and in its technical parameters above on this page.