HAKL BH10s
Code: HABH10SRelated products
Product detailed description
Electric storage water heater HAKL BHs 10 litres bottom-connected with thermostatic switching and pressure operation
The heater is not supplied with a faucet.
The electric storage water heater with thermostatic switching and pressure operation is an ideal solution for connecting to an existing water faucet and installing under a washbasin or sink.
HAKL BHs as a pressure storage water heater is intended for installation into a water supply system (domestic pump, public water supply system, gravity feed) or possibly for installation on an electrical circuit with weak fuse protection. Thanks to its shape it can be placed directly on the floor and installed under a washbasin or sink. The heater has an anode rod, which significantly slows the corrosion of the steel enamelled tank. Excessive water pressure is reliably reduced by the safety valve, which is included in the package. The required water temperature in the tank can be set using the thermostat with a frost-protection function. Protection of the heating coil is ensured by a thermal fuse.
Additional data:
- installation on pressure-free and commonly available water faucets
- pressure operation 6 bar with switching from 0,2 MPa
- thermostatic switching with regulation from 5°C to 75°C
- manufactured in one power version of the heating coil
- metal tank and anode rod against tank corrosion
- installation under a sink or washbasin without the need for anchoring
- service, emergency and frost-protection thermal fuse
Operating the heater:
You set the required temperature of the heated water by turning the thermostat dial in the range from 7 °C to 75 °C. By turning the thermostat dial to symbol " 1 " you set the frost-protection, which switches on the heating if the temperature drops below 7 °C. This prevents freezing and subsequent damage to the heater. The maximum heating and thermostat setting is approx. 75 °C. Despite the small water tank of 10/5 litres, by mixing 60 °C water with cold water you can achieve approx. 15/8 litres of 40 °C water.
Technical parameters:
- Input: 1,5 kW
- Fuse: 10 A
- Voltage: 230 V
- Volume: 10 litres
- Min. water pressure: 0,02 MPa
- Max. water pressure: 0,06 MPa
- Degree of protection: IP 24
Additional parameters
| Category: | IconicLine Series |
|---|---|
| Warranty: | 2 years |
| Weight: | 5 kg |
| The item has been sold out… | |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!