HAKL BH10v - top-connected

Product detailed description

Electric storage water heater HAKL BH 10v with thermostatic switching and pressure operation

The heater is not supplied with a faucet.

The BHv model range is a range of pressure storage heaters intended for installation into a water supply system (domestic pump, public water supply system or gravity feed with a water column over 4m) and possibly for installation on an electrical network with low fuse protection. Extended life of the steel enamelled tank is ensured by a built-in anode rod and a safety valve, which reliably reduces excessive water pressure. The bottom connection of the storage heater allows for easier draining of the water using a valve without the need to unhang it.

The required water temperature in the tank can be set using the thermostat with a frost-protection function. The second stage of protection of the heating coil is ensured by a thermal fuse. 

• Volume: 10 l
• Fuse/Voltage: 10A/230V
• Input: 1,5 kW
• Min. water pressure: 0,02 MPa
• Max. water pressure: 0,6 MPa
• Degree of protection IP: 24

Main advantages of HAKL BHv:

• installation also on pressure-free and commonly available water faucets 
• pressure operation 0,6 MPa with switching from 0,02 MPa
• thermostatic switching with regulation from 5 ° C to 75° C
• manufactured in one power version of the heating coil
• metal tank and anode rod against corrosion of the tank
• installation above a sink or washbasin
• service, emergency and frost-protection thermal fuse