HAKL MK SET 4.5kW heater with pillar-mount classic tap, 22cm IconicLine
Code: HA16MKSET1145Product detailed description
HAKL MK SET electric instant water heater and pressureless water tap is part of the ICONIC LINE range,
which offers customers permanently reduced prices while maintaining the consistently high quality of HAKL brand products.
KEY FEATURES
- installation on pressureless and commonly available water taps
- pressurized operation 6 bar, switching from 0.4 bar
- electronic switching with control unit
- connection to 230V, at 3.5kW directly into a socket
- instant and continuous water heating by up to 43 °C
- one power level of the heating coils
- higher waterproofing rating IP 45
- electronic two-stage protection against coil burnout
- hydraulic protection against overheating of the heating system
PRODUCT DESCRIPTION
The HAKL MK-1 instant water heater can be installed not only above/below a washbasin and kitchen sink, but also directly in a shower cubicle, or outdoors on a summer terrace. The electronic control unit also allows installation into a water system with a domestic pump station that has frequent aeration and repeated draining of the water system.
The heater can also be connected to a tap you have purchased yourself, using plumbing couplings (fittings). The electronics detect a drop in mains voltage and warn the user of reduced heating output by flashing an indicator light. The control unit with two thermal fuses significantly extends the service life of the heating coil.
Other specifications are identical to those of the HAKL PM-TB model range.
SET - HEATER WITH TAP
For easier purchasing, the HAKL MK SET electric instant water heater is supplied together with a HAKL pressureless pillar-mount classic tap HAKL, spout length 22 cm.The package includes a 3/8" seal and a water-saving aerator, which sufficiently aerates the water even at low flow rates, visually increasing its volume.
SUITABILITY TABLE
Additional parameters
| Category: | Water heaters and taps|SETS Instant water heaters + taps|MK classic taps |
|---|---|
| Weight: | 2.88 kg |
| EAN: | 8586018648387 |
| Manufacturer:: | HAKL - made in Slovakia |
| Power input:: | 4.5 kW |
| Voltage:: | 230 V |
| Fuse protection:: | 20 A |
| Volume:: | 0 l |
| Degree of protection:: | IP 45 |
| Pressurized operation:: | yes |
| Max. continuous water pressure:: | 6 bar |
| Min. switching pressure:: | 0.5 bar |
| Switching type:: | electronic |
| Manual power switching:: | no |
| Automatic power control:: | no |
| Electricity consumption measurement:: | no |
| Water consumption measurement:: | no |
| Thermal protection:: | yes |
| Second stage of thermal protection:: | no |
| Heating indication:: | yes |
| Water temperature display:: | no |
| Spacing of connection outlets:: | 1 inlet |
| Connection threads:: | 1/2" female |
| Water flow at 40°C:: | 2.7 l |
| Water flow at 60°C:: | 1.6 |
| Frost protection fuse:: | no |
| Product includes connecting cable:: | yes |
| Cable ends with plug:: | no |
| Connecting cable type:: | 3C 2.5 mm |
| Connecting cable length:: | 100 cm |
| Net weight:: | 2.61 kg |
| Gross weight:: | 2.88 kg |
| Product dimensions (h x w x d):: | 19.9 x 20.7 x 8.5 cm |
| Box dimensions (h x w x d):: | 24.6 x 35.2 x 10 cm |
| EAN:: | 8586018648387 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!