HydroTreat Nitrate and Sulfate Filter with ANEX Pure, 25 l
Code: DNM_E1035NI-HYS1Product detailed description
HydroTreat Filtration Unit with ANEX Pure media - Filter for removing nitrates and sulphates from water
With the HydroTreat with ANEX Pure filter, you can be sure that the water from your tap is safe and clean. The unit uses advanced filtration technology specifically designed to remove nitrates, nitrites and sulphates from water. This system is effective, easy to use and environmentally friendly. Unlike boiling, which does not remove these harmful substances, HydroTreat provides a reliable and long-term solution for your household.
Nitrates (NO₃⁻) and nitrites (NO₂⁻) are substances that can appear in water as a result of intensive agricultural production and the use of nitrogen fertilizers. Although they are naturally present in small amounts, their excessive presence in water can have serious health consequences. They pose an increased risk especially for children, pregnant women and people with weakened immunity.
In accordance with hygiene standards, the limit for nitrates in drinking water should not exceed 50 mg/l, for nitrites 0.5 mg/l, and appropriate limits are also set for sulphates. If these values exceed the set limit, the water becomes unsuitable not only for drinking but also for use in the kitchen.
Operation and maintenance - HydroTreat ECONOMY series
Filtration of nitrates and sulphates from water using the HydroTreat® ECONOMY unit with ANEX Pure resin works on a similar principle to HydroSoft water softeners, i.e. ion exchange. During operation, the unit captures nitrate, nitrite and sulphate ions from the water and replaces them with chlorides. Once the capacity is exhausted, the ANEX Pure resin requires regeneration with salt, during which it releases the collected nitrate, nitrite and sulphate ions again and is refilled with chloride ions.
Control unit features
- The control head ensures fully automatic regeneration of the media.
- During regeneration, raw water is not allowed through, so contaminated, unfiltered water does not enter the pipe system.
- Regeneration takes place at any time according to customer needs, usually at night around 2:00 AM.
- The control head is reliable and easy to operate.
- All necessary setup steps are shown on the control head in the Czech language.
Parameters
| Flow capacity | 0.7 - 1.5 m3/h | |||
| Filtration capacity (m3) | 225/(NO₃⁻ + SO4₂⁻) m3 | |||
| Connection | 1", external thread | |||
| Resin type and amount | ANEX Pure - 25 l | |||
| Brine tank | Built-in | |||
| Control head | HYS-1 | |||
<
Additional parameters
Product ratingBe the first who will post an article to this item! DiscussionBe the first who will post an article to this item!
Vytvořil Shoptet | Design Shoptak.cz.
>
>
|
