KARMA Alfa POV-13 PB
Code: NC-27836Product detailed description
KARMA Alfa POV-13 PB
The gas instantaneous water heater is equipped with a safety cut-out against water overheating and a flue-gas draught monitor. If the flue-gas draught fails and the flue gases return to the room, the appliance switches off. With a hot water flow of up to 13 litres/minute, the heater can be used to heat water for several draw-off points, meaning with hot water distribution e.g. to the kitchen and bathroom (sink, bath, shower). The flue gases are led out into the chimney; the heater does not need a 230V electrical connection to operate. The heater's heat exchanger is made of lead-free copper sheet, with regulation from Junkers. The water fitting is made of plastic resistant to limescale build-up. The heater is set up for use with propane-butane.
- hot water flow up to 13 litres/minute
- maximum heat output 22.6 kW
- option to connect several draw-off points
- piezoelectric ignition of the pilot flame
- safety cut-out against water overheating
- flue-gas draught monitor, switches off if flue gases return
- heat exchanger made of copper sheet (lead-free)
- water fitting made of plastic resistant to limescale build-up
- Junkers regulation
- protection against overheating of the heat exchanger
- automatically regulated output depending on water flow
- constant temperature of delivered water
- flue gases led into the chimney
- fuel: propane-butane
- does not require a 230 V electrical connection
- Colour: white
- weight (kg): 13
- Pilot flame ignition: piezoelectric
- Rated heat output, max (kW): 22.6
- Rated heat output, min. (kW): 7
- Rated heat input, max (kW): 26
- Consumption – natural gas (m3/h): 2.9
- Water inlet pressure, min. (Bar): 12 (0.1 MPa)
- Minimum operating water pressure (bar): 0.2
- Hot water flow (l/min): 2 to 13
- Safety cut-out: yes
- Outer dimensions – height (mm): 755
- Outer dimensions – width (mm): 400
- Outer dimensions – depth (mm): 220
- Required draught (mBar): 0.015
- Flue gas outlet diameter (mm): 130
- Output: 17
- Flue gas temperature (°C): 170
- 230V electrical connection: not required
- Power supply: not required
Additional parameters
| Category: | instantaneous water heaters |
|---|---|
| Warranty: | 2 years |
| Product replaced by new one: | https://www.atria.sk/protherm-panda-iog-mini-19/ |
| The item has been sold out… | |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!