Karma Gamat B 23

Product detailed description

Gas stove Karma Gamat B 23

 

Convection stove Gamat B23 with an output of 2.3 kW. This is an appliance with an open combustion chamber, designed for connection to a chimney with natural draught; combustion air is drawn in from the room in which it is installed.

• stove output 2.3 kW
• suitable for rooms with a volume of up to 40 m³
• thermostat temperature control
• resistant to freezing
• high stove efficiency
• high operating safety
• enamelled heat exchanger
• chimney sensor (microswitch) - backdraught safety cut-off
• wall-hung stove - install at least 150 mm above the floor
• mounted by hanging on the wall
• flue gases are led into the chimney via the top outlet
• stove casing made of steel sheet protected by special powder coating
• the standard stove colour is white
   

Frequently Asked Questions

• How do I choose the right output for a KARMA gas stove? Just as with gas boilers, base your choice on the calculated heat loss of the heated space. For electric heaters it is also essential to check whether your home's electrical connection can support it - higher outputs (roughly above 12 kW) usually require a three-phase 400 V connection and a correspondingly sized main circuit breaker, which your electrical inspector or the electricity distributor can confirm.
• Is an electric boiler worth it compared to a gas or solid-fuel boiler? An electric boiler has the lowest purchase price and the simplest installation (no flue is needed, since nothing is combusted), but running costs on electricity are usually higher than gas or wood/coal for the same amount of delivered heat. It is best suited where gas is not available, as a supplementary/backup source, or for a low-consumption building (well-insulated new builds, cottages, apartments).
• How does an electric boiler regulate output? Most models switch the individual heating elements on/off in stages, while some more modern models also allow smoother output modulation - this affects heating smoothness and, to some extent, the lifespan of the switching components.
• Can I install this electric boiler myself? Connection to the electrical grid, inspection and commissioning must be carried out by a person with electrical qualification in accordance with the applicable STN 33 2000 standard and related regulations - self-installation is not permitted, either for warranty reasons or for safety reasons.
• Can this electric boiler also heat domestic hot water? For many models, yes - usually in combination with a separate hot water tank and a switching (3-way) valve that switches between the heating circuit and heating the tank. You can find the exact option and required accessories for this specific model in the technical parameters above, or consult our customer service.