Karma POV 14BK ZP
Code: POV 14BK ZPRelated products
Product detailed description
Karma POV 14BK ZP
They supply water to one or several outlets at the same time (bathroom + kitchen). They are equipped with battery ignition, requiring no connection to an electricity supply. This ensures significant gas consumption savings. Gas is only used in connection with heating water, which is delivered into the system instantly in volumes of up to 14 litres per minute, depending on the product type.
Advantages:
- LED display
- flue gas discharge safety thermostat
- water overheating protection fuse
- option to connect multiple outlets
- heat exchanger made of copper sheet
- zero gas consumption in standby mode
- battery 2x1.5V - LR20 not included with the product
- instantaneous heaters are made for natural gas
- standard colour – white
The instantaneous water heater must be installed by technicians who hold professional qualifications for this work.
Technical parameters :
- Ignition type: battery
- Output min./max.: 7.9/24.7 kW
- Consumption min./max.: 0.94/2.95 m³/h
- Hot water flow rate min./max.: 5.9/12.00 l/min.
- Weight: 10.9 kg
- Max. flue gas temperature: 240°C
- Energy efficiency class: A
Frequently asked questions
- What output should I choose for an instantaneous water heater? A higher electrical output allows a higher hot water flow rate for a given temperature rise (the difference between the cold water temperature and the desired hot water temperature) - for example, an 18-21 kW heater is usually enough for a single shower, while a 24-27 kW unit comfortably handles a slightly higher flow rate or colder inlet water in winter.
- Can my electrical installation handle this output? Heaters with an output above roughly 11 kW usually require a three-phase 400 V connection and an appropriately sized circuit breaker (typically 3x 25 A or more for higher outputs) - before buying, we recommend checking the capacity of your home's electrical installation, ideally with an electrician.
- Can I install this KARMA heater myself? Connecting it to the water pipework is not technically unmanageable on its own, but connecting it to the electrical mains (especially for outputs above 3.5 kW, where it is usually a fixed connection rather than a socket) must be carried out by a person with electrical qualifications.
- What is the difference between a pressurised and a non-pressurised (open-outlet) design? A pressurised heater is connected to the normal pressurised water piping and can supply several outlets in a flat/house at the same time through the piping. A non-pressurised (open) heater works with only one outlet specifically assigned to it and a special non-pressurised (three-way) mixer tap - these two systems cannot be combined with each other, nor can their accessories be interchanged.
- How long does it take for hot water to start flowing? With instantaneous heating, the water is heated continuously as it flows through the heater - hot water is therefore available practically immediately after opening the tap (once the cold water already in the pipe has been pushed out); unlike storage water heaters, there is no need to wait for a larger volume of water to be pre-heated.
Additional parameters
| Category: | Karma |
|---|---|
| Warranty: | 2 years |
| Weight: | 10 kg |
| Energy Consumption Class: | A |
| Ignition Type: | battery powered |
| Max. flue gas temperature: | 240°C |
| Output min./max.: | 7,9/24,7 kW |
| Prietok teplej vody min./max.: | 5,9/12,00 l/min. |
| Spotreba min./max.: | 0,94/2,95 m³/h |
| Weight: | 10,9 kg |
Product rating
The average product rating is 5,0 out of 5 stars.
1 rating
5
4
3
2
1
Leave a rating
List of ratings
5
M
Majo
Majo
Produkt super….som dokonale spokojny
Discussion
Be the first who will post an article to this item!