Lumar UPSL 600
Code: LUMAR UPSL 600Product detailed description
Backup power supply Lumar UPSL 600
Automatic backup power supply for electrical appliances such as boilers or circulation pumps for central heating. Backup power supply Lumar UPSL 600 should not be missing from the equipment of any wood or solid-fuel boiler room. Since a wood boiler does not stop during a power outage, the wood keeps burning for hours. This can lead to overheating, rupture of the boiler, or in the worst cases even a fire. In this situation, the backup power supply Lumar UPSL 600 will keep supplying electricity to run the pump, which will carry hot water away into the system, thereby cooling the boiler, and to the boiler controller, which will take care of regulating the boiler or switching it to standby.
Lumar UPSL 600, whose parameters satisfy even the most demanding customers. Compared with other competitors and given its performance, the device also offers excellent value, which is very important to the customer. The device is certified and approved by the Slovak Trade Inspection. It also meets all electrotechnical standards and directives EC, EMC, EEC, EN, IEC and has a modified sine-wave output.
The device LUMAR UPSL 600 is fully automatic. If a power outage occurs, it generates 230V 50 Hz from the connected battery, protecting your pump, stove, fireplace, pellet boiler and other appliances connected to the central heating system. Once the mains supply is restored, the device automatically recharges the connected battery.
Technical parameters:
- Output: 600 W
- Input voltage: 230 V / 50 Hz
- Output voltage: modified sine-wave waveform, electronically adjusted to an almost constant value as with pure sine-wave power supplies
- Short-term overload: 1200 W
- AC output: 230 V 50 Hz +/- 10 %
- Sine-wave shape: modified sine wave
- Other: USB 5V dc 500 mA
- DC input: 12 V (10-16 V)
- AC input: 120-260 V
- Max. charger current: 10 A
- Charging method: Constant current, voltage. Float charging (automatic, 3 stages)
- Transfer time: < 8 ms (does not affect most appliances)
Features:
- Protection against: unwanted currents, battery reverse polarity, overload, overvoltage, overheating, low voltage, output short circuit. All automatic.
- Interference isolation, soft start.
- The transfer between mains power and battery power is less than 8ms, which will not affect the load's power supply in the event of loss of input voltage.
- Separate 5V/1000mA (USB) output, can be used for charging a mobile phone and digital devices.
- Dual power control (inverter and charger switching), so it can also handle a deeply discharged battery.
- LED indication with 4 diodes: red, green, yellow, red / fully charged battery, charger, inverter, fault.
- High-frequency PWM technology, small dimensions, high output.

Additional parameters
| Category: | Backup power supplies – discontinued models |
|---|---|
| Warranty: | 2 years |
| Weight: | 21 kg |
| Product replaced by new one: | https://www.atria.sk/avansa-500-w/ |
| The item has been sold out… | |
