Nitrate and Sulfate Filter HydroTreat with ANEX Pure - 37 l
Code: DNM_1054NI-HYS1Product detailed description
HydroTreat Water Filter with ANEX Pure Media - Removal of Nitrates and Sulfates from Water
With the HydroTreat with ANEX Pure filter, you can be sure that the water from your tap is safe and clean. The device uses advanced filtration technology specifically designed to remove nitrates, nitrites and sulfates from water. This system is efficient, easy to use and environmentally friendly. Unlike boiling, which does not remove these harmful substances, HydroTreat provides a reliable and long-term solution for your household.
Nitrates (NO₃⁻) and nitrites (NO₂⁻) are substances that can appear in water as a result of intensive agricultural production and the use of nitrogen fertilizers. Although they are naturally present in small amounts, their excessive presence in water can have serious health consequences. They pose an increased risk especially to children, pregnant women and people with weakened immunity.
In accordance with hygiene standards, the limit for nitrates in drinking water should not exceed 50 mg/l, for nitrites 0.5 mg/l, and appropriate limits are also set for sulfates. If these values exceed the set limit, the water becomes unsuitable not only for drinking but also for use in the kitchen.
Operation and Maintenance - HydroTreat ECONOMY Series
Filtration of nitrates and sulfates from water using the HydroTreat® ECONOMY device with ANEX Pure resin works on a similar principle as the HydroSoft water softeners, i.e. ion exchange. During operation, the device captures nitrate, nitrite and sulfate ions from the water, replacing them with chlorides. Once its capacity is exhausted, the ANEX Pure resin requires regeneration with salt, during which it releases the collected nitrate, nitrite and sulfate ions and is refilled with chloride ions.
Control Head Features
- The control head ensures fully automatic regeneration of the media.
- During regeneration, it does not let raw water through, so contaminated, unfiltered water does not enter the piping system.
- Regeneration takes place at any time according to customer needs, usually at night around 2:00 AM.
- The control head is reliable and easy to operate.
- All necessary setting steps are shown on the control head in the Czech language.
Parameters
| Flow capacity | 1.0 - 2.0 m3/h | ||||
| Filtration capacity (m3) | 330/(NO₃⁻ + SO4₂⁻) m3 | ||||
| Connection | 1", external thread | ||||
| Resin type and amount | ANEX Pure - 37 l | ||||
| Brine tank | 145 liter | ||||
| Control head | HYS-1 | ||||
| Dimensions (H×W×D) | 1530 × 7
Additional parameters
Product ratingBe the first who will post an article to this item! DiscussionBe the first who will post an article to this item!
Vytvořil Shoptet | Design Shoptak.cz.
>
>
|
