Pipe calibrator
Code: KALIBRATOR NA POTRUBIERelated products
Product detailed description
Pipe calibrator for PEX-AL-PEX pipe 16 mm / 20 mm / 26 mm.
After cutting, the profile of the PEX-AL-PEX pipe becomes slightly flattened and a sharp edge (burr) remains at the cut. The calibrator restores the pipe to a perfectly round cross-section and at the same time removes this burr, ensuring a tight and reliable connection for both screwed and pressed fittings.
Benefits of use:
- Work speed - calibration and burr removal are performed in a single operation
- Precise connections - each size has precisely defined dimensions
- Joint quality - a perfectly round pipe cross-section ensures tightness at the connectors
- Versatility - the most popular sizes (16/20/26 mm) in one tool
Use: before fitting any screwed or press fitting onto PEX-AL-PEX pipe.
Frequently asked questions
- Is this tool suitable for a home handyman, or only for professionals? It depends on the specific type - a home handyman can easily use simple hand tools, while specialized tools (e.g. pressing pliers, a welding device) require training and experience.
- How should I care for the tool so it lasts a long time? After each use, clean off any dirt and store it in a dry place; for precision tools (e.g. pressing jaws), follow the service intervals recommended by the manufacturer.
Additional parameters
| Category: | Couplings, Pipe Fittings |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.1 kg |
| Funkcia: | diameter calibration and deburring |
| Piping material: | PEX-AL-PEX |
| Suitable Pipe Diameters: | 16 / 20 / 26 mm |
Product rating
The average product rating is 5,0 out of 5 stars.
1 rating
5
4
3
2
1
Leave a rating
List of ratings
5
FC
František Cicoň
František Cicoň
S produktom som spokojný.Čo som objednal to som dostal včas.
LA
Lenka ATRIA.SK
(Administrator)
Lenka ATRIA.SK
(Administrator)
Teší nás že ste spokojný, ďakujeme
Discussion
List of discussions
M
martin.f
martin.f
dobry, mozem ho použiť aj na medene potrubie? alebo má sa to? je to povinné?
A
ATRIA
ATRIA
Dobrý deň,
kalibrátor slúži na zarovnanie a skalibrovanie konca potrubia pred montážou spojky – používa sa najmä na plastové a viacvrstvové rúry (PEX-AL-PEX a podobne). Na medené potrubie sa bežne nepoužíva, tam sa pracuje inak (rezanie, odvíjanie, spájkovanie).
Povinné to nie je, ale pri plastových rúrach je to štandardný postup, ktorý zabezpečí správne a tesné spojenie – bez kalibrovania môže byť koniec rúry zdeformovaný a spojka netesní.
S pozdravom,
Roman Krajčí
ATRIA.SK
+421 917 133 662
info@atria.sk
www.atria.sk │ www.atria-europe.com
P
Peter
Peter
Dobry den,
mam v plane kupit trubku PEX-AL-PEX 20x2 pre rozvod vody. Aky priemer izolacie mam pouzit ?
Dalsia moja otazka je ohladom kurenia. Mam tepelne cerpadlo monoblok, ktore by som chcel pripojit uz do existujuceho radiatoroveho systemu paralelne k plynovemu kotlu. Docital som sa na nete, ze je dobre pouzit vodorovne spätne klapky pred obehove cerpadla. Problem je, ze na plynovy kotol nemam moznost napojit spätnu klapku vodorovne. Su klapky aj pre zvislu montaz ?
Este by som sa rad opytal, tepelne cerpadlo ma pripojenie vodu potrubim DN25. Predpokladam, ze mozem pouzit trubku PEX-AL-PEX 26x3. Aku izolaciu pre tento priemer odporucate ?
Dakujem.