press wall plates
Product sorting
17 items total
List of products
Listing controls
17 items total
IVAR.PT 5723 - Through press wall plate
- PN 10, T = +120 °C
- for connecting ALPEX pipe of the same diameter
- material: nickel-plated brass CW617N, stainless steel sleeve, EPDM seal
IVAR.PT 5724, IVAR.PT 5725 End press wall plate
- PN 10, T = +120 °C
- for connecting ALPEX pipe
- material: nickel-plated brass CW617N, stainless steel sleeve, EPDM seal
IVAR.PTM 5760 - End press wall plate
- PN 10, T = +120 °C
- for connecting ALPEX pipe
- material: nickel-plated brass CW617N, stainless steel sleeve, EPDM seal
IVAR.MP 5760 - End press wall plate, heavy-duty
- PN 10, T = +120 °C
- for connecting ALPEX and TURATEC pipe
- The IVAR.MP 5760 press end wall plate has a massive, reinforced body that eliminates the risk of cracking caused by improper installation and over-tightening of the counterpart's threaded connection
- material: brass CW617N, stainless steel sleeve, EPDM seal
IVAR.PT 5780 - Through press wall plate
Frequently Asked Questions
- What is the difference between an end wall plate and a through wall plate? A through wall plate allows the run to continue further through the body of the plate, while an end wall plate terminates the pipe branch and is used only for connecting a tap or another appliance.
- What is the maximum working load of a wall plate? Standard PRESS wall plates are rated for PN 10 and temperatures up to +120 °C, covering both hot and cold water lines as well as heating.
- What does the IVAR.MP 5760 version offer compared to the standard wall plate? It has a more massive, reinforced body which reduces the risk of cracking during improper installation or over-tightening of the threaded joint with the counterpart.
- What material are the wall plates made of? Nickel-plated brass CW617N, with a stainless steel sleeve and an EPDM seal.