Protherm Panda IOG 24

Product detailed description

& nbsp;

Features of PANDA heaters:

• Energy savings due to wider burner power modulation range (35-100%) and optimized output power selector settings (50-100%) ( OPTI-MOD),
• proven and reliable technology of the used low Nox burner (water-cooled burner),
• elegant design and simple operation,
• without the need for power supply energy.

& nbsp;

Flow heater equipment:

• device with flue gas leak sensor, < /li>
• electronic ignition,
• powered by a single battery (monocell LR20).

& nbsp;

Technical parameters:

Frequently Asked Questions

• What output of instantaneous water heater should I choose? A higher output allows a higher hot water flow rate for a given temperature rise (the difference between the cold water temperature and the desired hot water temperature) - e.g. an 18-21 kW heater is usually enough for one shower, while 24-27 kW comfortably handles a slightly higher flow or colder inlet water in winter.
• Can my home’s wiring handle this output? Heaters with an output above roughly 11 kW usually require a three-phase 400 V connection and a correspondingly sized circuit breaker (typically 3x 25 A or more for higher outputs) - before buying, we recommend checking the capacity of your home’s electrical installation, ideally with an electrician.
• Can I install this PROTHERM heater myself? The water pipe connection itself is not technically difficult, but the connection to the electrical network (especially for outputs above 3.5 kW, which usually require a fixed connection rather than a plug) must be carried out by a person with electrical qualifications.
• What is the difference between a pressurised and an unpressurised (open-outlet) design? A pressurised heater is connected to the standard pressurised water supply and can supply several outlets in the flat/house at once via the piping. An unpressurised (open) heater works with only one specific outlet and a special unpressurised (three-way) tap - these two systems cannot be combined, nor can their accessories be interchanged.
• How long does it take before hot water starts flowing? With instantaneous heating, the water is heated continuously as it flows through the heater - hot water is therefore available practically immediately after opening the tap (once the cold water in the pipe has been pushed out); unlike storage heaters, there is no need to wait for a larger volume of water to be heated in advance.